IMPORTANT SAFETY INSTRUCTIONS Thank you very much for your purchase of our DVD Mini HiFi System. To optimize the performance of this system, please take the time to read through this manual and become familiar with the operation procedures. Be sure to keep this manual for future reference.
Page 4
To optimize the performance of this system, please take the time to read through this manual and become familiar with the operation procedures. Be sure to keep this manual for future reference. Notes on handing Power defend 1. Please place the unit on flat surface and under Protect power cable.
OPERATION INTERFACE Panel Diagram 1. Power 2. USB slot 3. Mic jack 4. Volume 5. Play/Pause 6. Open/Close 7. Prev 8. Next 9. Left / Right channel Back Panel Diagram 1. FM Radio Antenna 4. Cb/Pb Video 7. Right sound channel output 2.
BASIC OPERATION I. Power on Press the “POWER” key to make the POWER ON, and then it will show “Reading disc” on the TV screen. If there is no disc in the machine, it will show “no disc”. II. Place disc Click ”Close /Open”...
following ways: 2.1 If for DVD discs, if fast backward to the next title / chapter / the beginning, play from the beginning location; if for SVCD, VCD discs, in the ”PBC on” status, if fast backward to the initial position of next song, play from the beginning location.
optional angle total number) or [No] (there is or not optional angle and total number to this disc, if the disc without the optional angle information, the TV screen displays “You have pressed the wrong key”) 8. Mute 1) After pressing the remote control’s mute key, the audio output turn off, the TV screen displays “Mute”...
Through the direction key to move, and enter the directory area to select the required directory to play, at the same time play the first song in the directory; through the direction key to move, you can enter the file area to select the required file to play.
This product factory setting in the no power off memory status is no power off memory function. If need it only require the following conversion: 1: Plug in the power and boot the machine connected with TV, make the machine in stop status. 2: Press ”Settings”...
Page 12
Troubleshooting Before contact with the repair person, you should check the problem reason follow the instructions. Phenomenon Reasons Countermeasures 1.Please correctly connect the audio 1.Audio line properly line connected No sound 2.Please clean and handle disc 2.Disc deformed or dirty 3.Please press mute button again to 3.The machine n a mute status cancel mute...
Need help?
Do you have a question about the CH03N and is the answer not in the manual?
Questions and answers