RFC MR 52WEN User Manual page 7

1
Use two suitable wall plugs / screw anchors (not provided) to fix the
mounting accessory to the chosen point on the wall. These need be chosen
carefully, according to the wall type (plasterboard, hollow bricks, solid bricks,
concrete, matchboard panelling, etc.).
2
Fix the L-shaped bracket (/ 'L' plate) to the speaker rear by using two bolts.
3
Connect both the input cable and the output cable (when necessary, to link
other speakers in parallel). See the next user manual section relating to the
connection.
Put the cover on the ceramic screw terminal protective box and fix it with a
4
screw.
Install the speaker by joining the L-shaped bracket to the mounting accessory
5
(that has already been fixed to the wall) through a bolt.
5
2
1
3
4
7