Samsung N230 User Manual page 92

Computer Backup/Restoration
(Samsung Recovery Solution / For supported models only)
4
The restoration progress message appears after the computer
boots up in restoration mode. If you click OK, the restoration
begins.
If multiple DVDs have been used for a Complete Backup,
whenever burning a DVD is completed, the "Insert the next
DVD" message will appear.
5
When the 'Restart the System' message appears after the
restoration is complete, click OK to restart the system. The
Complete Restore has been completed.
Data Backup/Restore
Data Backup enables you to save specific files or folders onto
another drive or DVD. Data Restore enables you to restore data
using the data saved by a Data Backup when data is lost. This
guide describes the Backup and Restore procedures on the basis
of backing up and restoring by using DVD.
► Data Backup
1
When the Samsung Recovery Solution start screen appears,
click Backup and then click Data Backup.
2
In the data selection screen, select either Basic Selection or
Select from all, select a folder or file to be backed up, and
then click the Next button.
3
Enter a description for the backup in the Description field
so that you can easily recognize it later and specify the Save
Path. If your computer has a DVD-Writer, you can specify the
DVD drive as the Save Path.
Select Drive D.
If you have specified a hard disk drive or a removable disk as
the Save Path, the SamsungRecovery\SamsungData folder
is created on the corresponding drive (e.g. D:\) and the data
is saved to the folder. Take care to not delete the folder by
mistake or on purpose.
Chapter 4
Troubleshooting
Select the DVD drive.
91