Options - Electrolux ESF6535LOX User Manual

10 www.electrolux.com
• The indicator
to flash.
• The display shows the current
setting.
–
–
3. Press Option to change the setting.
4. Press the on/off button to confirm the
setting.
5. Adjust the dosage of rinse aid.
6. Fill the rinse aid dispenser.
6.4 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to activate
it.

7. OPTIONS

Desired options must be
activated every time before
you start a programme. It is
not possible to activate or
deactivate options while a
programme is running.
Not all options are compatible
with each other. If you have
selected non compatible
options, the appliance will
automatically deactivate one
or more of them. Only the
indicators of the options still
active will stay on.
7.1 Multitab
Activate this option when you use multi-
tablets that integrate the salt, rinse aid and
detergent functions. They can also contain
other cleaning or rinsing agents.
This option deactivates the release of salt
and rinse aid from the respective
www.markabolt.hu
= rinse aid dispenser
deactivated.
= rinse aid dispenser
activated.
continues
How to activate the acoustic
signal for the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode press and
hold simultaneously Delay and Start
until the indicators
and
blank.
2. Press Delay
• The indicators
• The indicator
• The display shows the current
setting:
3. Press Delay to change the setting.
4. Press the on/off button to confirm the
setting.
containers. The salt and rinse aid
indicators do not come on.
With the use of this option the programme
duration is prolonged to increase the
cleaning and drying results with the use of
multi-tablets.
How to activate Multitab
Press Option until the indicator
on.
7.2 EnergySaver
This option decreases the temperature of
the last rinsing phase and consequently
also the energy consumption
(approximately -25%).
Dishes can still be wet once the
programme is completed.
The duration of the programme will be
shorter.
start to flash and the display is
go off.
continues to flash.
– = Acoustic signal off.
– = Acoustic signal on.
,
and
comes