TABLE OF CONTENTS
1.
Location of Controls ....................................................... 3
Installation ....................................................................... 6
Connections ..................................................................... 7
2.
3.
4.
5.
Test Mode ........................................................................ 16
Tuner Section .................................................................. 17
6.
7.
EXPLODED VIEWS
8.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270 ˚C dur-
ing repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
- 2 -
......................................................... 10
....................... 16
................................................ 41
............................... 44
........... 13