INTRODUCTION Thank you for purchasing the VTech 4-in-1 Stroll & Grow Tek Trike™. ® Through interactive riding, your child can pretend to role-play and enjoy cheerful melodies and sing-along songs. With the interactive panel and four trike stage settings, your child...
SAFETY WARNINGS WARNING: All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties and packaging screws are not part of this toy, and should be discarded for your child’s safety. NOTE: Please keep this parent’s guide as it contains important information. ATTENTION: Pour la sécurité...
DRIFT STAGE: USE WITH CAUTION When using the 4-in-1 Stroll & Grow Tek Trike™ in drift stage, riders and guardians should use at their own risk and exercise common sense. It is possible to lose control, fall off and/ or get into unsafe situations. Keep an eye out for obstacles and situations that could force you to unexpectedly swerve or lose control. Hold the handlebars at all times. Do not hitch a ride on a vehicle at any time. Avoid riding on uneven or unsafe surfaces. We advise you to ride on solid, flat, level ground. Do not use indoors. The recommended rider age of 4-6 years for the drift stage is a suggestion. Any rider unable to comfortably fit on the 4-in-1 Stroll & Grow Tek Trike™ in drift stage should not attempt to ride it.
ASSEMBLY AND SET-UP For additional assistance, watch our assembly video at: vtechkids.com/trike INCLUDED HARDWARE REQUIRED TOOLS FOR ASSEMBLY T2 (x2) for D T3 (x3) for B,C T4 (x2) for J T1 (x1) (for G & C) T7 (x12) for F,N,K,T8 T8 (x2) (for I & A) T9 (X2) for B (NOT INCLUDED) Left T7 (x2) Right T7 (x2) 1.
Page 7
T7 (x2) 5. Push the storage bin (F) into the 6. Then, screw them together, using frame (C) until it’s secure. 2 T7 screws. Then, set it aside. T2 (x2) STAGE 1,2 STAGE 3 STAGE 4 7. Align the opening of (D) with frame 8.
Page 8
T7 (x4) 11. Then, screw them together using 12. Align the opening of frame (B) 4 T7 screws. with frame (A). T3 (x2) 13. Then, fasten T9 to frame (B) with 14. Push the frame (C) into the 2 T3 screws and nuts. frame (B).
Page 9
P2 (x1) P2 (x1) 17. Install the seat belts (P2) for the removable seat back . T4 (x2) Push Bead 3 holes 18. Use a screwdriver to push the grey 19. Align the handle (J) with the bar (G). Use T10 to fasten with 2 T4 pole inside (G) so that the push bead will glide through the white screws and nuts.
Page 10
22. To add the footrest to the trike, first, 23. Then, put the footrest (K) on top make sure the front steering lock is of the trike frame. Ensure the in the unlock position and turn the footrest fits snug under the ridges handle bars to the trike’s left side. on the trike frame. T7 (x1) T7 (x1) T7 (x1) T7 (x1) 24.
Page 11
STAGE 1 - STROLL Note: 9 - 18m This is the rear wheel steering control stroller, always adjust the moving direction before pushing forward. STAGE 1,2 STAGE 3 STAGE 4 Turn pedal lock 2. Move the seat to the stage 3.
Page 12
STAGE 2 - TRAIN 18 - 24m STAGE 1,2 STAGE 3 STAGE 4 1. Remove the wraparound safety bar. 2. Remove the footrest. 3. Make sure the front 4. Move the seat to the steering lock is in the lock stage 2 position by removing position.
Page 13
STAGE 3 - RIDE 2 - 4yrs STAGE 1,2 STAGE 3 STAGE 4 Press Press 1. Remove the canopy and 2. Turn the pedal lock counter- 3. Remove the height- clockwise to lock the pedals. the removable seat back. adjustable push handle. The pedals will control the movement of the front wheel when the pedals are locked.
Page 14
STAGE 4 - DRIFT 4 - 6yrs STAGE 1,2 1. Move the seat to the stage 4 position by removing the screws, adjusting the STAGE 3 STAGE 4 position and then screwing the seat into position. 4. Turn the wheel locks to 2.
PRODUCT FEATURES 6. FOUR ROLE-PLAY BUTTONS 1. ON/OFF BUTTON Press the ROLE-PLAY To turn the unit ON, press BUTTONS to hear ON/OFF BUTTON. different phrases from Press the ON/OFF BUTTON each character. again to turn the unit OFF. 2. MODE SELECTOR 7. LOCATION BUTTONS Slide the MODE SELECTOR Press the LOCATION to select a mode.
IMPORTANT NOTE: try to correct the interference by one or more of the Creating and developing VTech products is ® following measures: accompanied by a responsibility that we at • Reorient or relocate the receiving antenna.
Return of the product under Warranty must adhere to the following rules: If VTech believes that there may be a defect in the materials or workmanship of the product and can confirm the purchase date and location of the product, we will at our discretion replace the product with a new unit or product of comparable value.