Maintenance - ADJ ENTOUR CYCLONE User Instructions

Entour Cyclone
Channel Value
1
0
1 - 255
Entour Cyclone
Channel Value
1
0
1 - 255
2
0 - 127
128 - 255
ADJ Products, LLC - www.adj.com - Entour Cyclone Instruction Manual Page 10
1 Channel Mode
Function
FAN OUTPUT
OFF
1%-100% FAN SPEED
2 Channel Mode
Function
FAN OUTPUT
OFF
1%-100% FAN SPEED
FAN ON/OFF
OFF
ON
Entour Cyclone
From time to time, the fan and grill will become dirty and dusty.
The grill can easily be removed and cleaned as well as gaining
access to the fan. Before removal and cleaning unplug all power
being supplied to the unit. Make sure the fixture has cooled
down if it was in use.
Note: You cannot remove both grills at the same time. One side
must be done first, reassembled and then the other side can be
disassembled and cleaned.
Clean the front screen
Using a standard 4mm Allen
wrench remove the 4 Allen
screws from the front grill.
Clean thoroughly. Reattch
the grill using the 4 Allen
screws.
ADJ Products, LLC - www.adj.com - Entour Cyclone Instruction Manual Page 11

Maintenance

Clean the rear screen
Remove the 4 Allen screws
from the rear grill. Clean
thoroughly. Reattch the grill
using the 4 Allen screws.