Appendix C: Camera Removal - RIDGID seesnake compact2 Operator's Manual

Appendix C: Camera Removal

1. Snap the included spanner wrench onto the spring,
just behind the camera.
2. Align the notch inside the spanner wrench with the
end of the spring coil.
3. Unscrew the spring from the camera.
Find Quality Products Online at:
GlobalTestSupply
www.
4. Unscrew the locking sleeve from the camera.
5. Pull the camera straight out of the sonde's socket.
To avoid damaging the camera's connec-
NOTICE
tor pins, do not bend or twist while pull-
ing the camera out of the connector.
.com
sales@GlobalTestSupply.com
English – 25