Kenwood KRF-V7771D Service Manual page 4

KRF-V7771D/V7771DE
Note Note
Perform "Model Type Setup"
of the remote control before
using it.
The following menu display ap-
pears after the batteries are
loaded for the first time.
Model Type Setup
Model 1
Model 2
1 Segment screen
The fixed icons are displayed in this area.
÷ Main Menu icon :
Select to display the Main Menu screen.
÷ Phono icon
÷ CD 1 icon
÷ Tuner icon
÷ MD/Tape 1 icon
÷ CD 2/Tape 2 icon
÷ Video 1 icon
÷ Video 2 icon
÷ Video 3 icon
÷ Video 4 icon
÷ AV AUX icon
÷ TV 1 icon
÷ TV 2 icon
÷ Macro icon : Select to control macro operation.
÷ Input Digital icon : Select to play a digital input.
÷ Input Analog icon : Select to play an analog input.
÷ Remote Mode icon : Select to switch the remote control operation
mode without changing the selected input.
4
CONTROLS
1
Main
Menu
2
TV1
Select to switch input and control the se-
lected input. ( Phono and AV AUX : Input
selection only )
Select to control TV.
MD/ CD2/ Input
Input
Tape1 Tape2 Digital
Phono CD1 CD2 Tuner
Remote
Macro
TV2 Video1 Video2 Video3 Video4 AV AUX
Setu p Surround
SP Selection
SP Distance
SP Level
2 Menu screen
Control key icons and control levels are displayed in this area.
3 Communication status display
Shows the communication status.
4 Joy stick
This key is used to select an icon. This key can be controlled in
4 directions.
5 ENTER key
Press to enter the selection of an icon.
6 VOLUME (up, down) key
Press to control the volume.
7 CONFIRM key
Press to confirm the currently selected items.
8 MUTE key
Press to mute the audio temporarily.
9
(ON/STANDBY) key
Press to turn the receiver and the components connected to it
through system cords between ON and STANDBY modes.
0 Return (
Select to return to the previous menu screen.
4
3
ENTER
Analog
VOLUME
Mode
MUTE
CONFIRM
ON/STANDBY
)icon
5
6
7
8
9
0