Advertisement
Important Safeguards
For your safety, please read all the instructions regarding officeBOX™ appliance.
a. Safety precautions
For your protection when setting up your equipment, observe:
All cautions and instructions marked on the equipment should be followed Make sure that your
power source voltage and frequency matches the one required by your equipment Never insert
objects through openings on the equipment. This can be dangerous and can damage your
equipment.
b. Power source and power cords
Make sure that your power source voltage and frequency matches the one required by your
equipment.
WARNING: OfficeBOX™ is designed to work with the single-phase power systems. To reduce
the risk of electrical shock, do not plug the equipment into any other power system. If you are
not sure what kind of power system your facility has, contact the facility manager or qualified
electrician.
WARNING: Your officeBOX™ power supply is shipped with a grounded type power cord, so to
reduce the risk of electrical shock, always plug the cord into a grounded power outlet.
WARNING: Not all power adapters will fit your officeBOX power supply, so usage of power
adapters other than the one supplied with your box is not recommended.
c. Electrical Shock
To reduce the risk of electrical shock, do not disassemble or tamper in any way with the power
supply. Opening the power supply may expose you to dangerous voltage, and incorrect
reassembly will damage your equipment
d. Top cover
In order to add cards or internal storage, you will have to remove the top cover. Make sure to
place the top cover back before turning on the appliance. officeBOX™ should not be in function
without its top cover in place, as this can lead to equipment damage or injury.
e. Equipment modifications
Do not make any hardware modifications to the equipment. Bicom Systems is not responsible for
any damage or injury as a result of the equipment modification.
f. Ventilation
Although officeBOX™ does not use active cooling, it is not overheating at all. Still, good
ventilation space is required for proper work of the appliance. Openings on the appliance must
not be covered or blocked and should be kept free from the dust.
g. Placement
Openings on the top cover are meant as a ventilation of any small amount of excess heat that is
not transferred to the side aluminum cooler, and they should be kept unobstructed. Make sure
that appliance is stored in a well vented place and no objects should be placed on top of it.
Advertisement
