Page 1
® ® t h e c o n n e c t i n g ® EINFORCEMENT APACITOR RP7400/7402/7405/ 7410/7430/7435 Installation & Application Manual...
Page 2
NSTALLATION OUNTING The Rockford Fosgate Reinforcement Capacitor should be mounted as close to the amplifier as possible keeping the wire runs short to reduce voltage losses in the cables. Use the mounting brackets supplied to secure the capacitor as close to the amplifier as possible.
Page 3
HARGING The supplied resistor is used to initially charge the capacitors. The charging process is accomplished by connecting the resistor in series between the positive side of the battery and the positive terminal of the capacitor. It is very important that polarity be observed and main- tained during this process to eliminate the possibility of damaging the capacitor, the battery, or other associated equipment.
Page 4
‘S ’ C OWER ERIES TATUS DDITIONAL NSTRUCTIONS Charge Level Indicator With the engine running and the system turned on at a Positive Terminal v o l t a g e l e v e l reasonable level, all bars Connect to should be lit.