Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Floorwash F25
Summary of Contents for Floorwash F25
- Page 1 FLOOR SCRUBBER MANUAL OF USE AND MAINTENANCE...
-
Page 2: Table Of Contents
Foreword Manual content, use and maintenance Storage of manual of use and maintenance Machine delivery F25 technical description Serial number General safety rules Recommendations Warnings Technical data Spare parts Packaging specifications and dimensions Machine unpacking Machine assembly How to get started... -
Page 3: Foreword
MACHINE DELIVERY The F25 machine is delivered in a protective packaging. Ensure that the packaging is fully intact and that there are no signs of tempering when the product is taken over. The customer should notify our customer service immediately in case of damages. -
Page 4: Recommendations
Recommendations • The machine is not intended to be used by persons (including children) whose physical, sensory and mental capacities are impaired, or with lack of the necessary experience and knowledge, unless they are supervised or instructed in its use by persons responsible for their safety. •... -
Page 5: Warnings
Warnings Always unplug the power cable from the outlet when not in use or before adjustments and maintenance are performed. Do not use or keep the machine outside in wet conditions, and avoid direct exposure to rain. Do not hold the plug or machine with wet hands. The machine is suitable for use in dry conditions at a temperature range of +5°C to +35°C (+41°F to +95°F). -
Page 6: Technical Data
Request original spare parts only to dealers and/or authorised resellers in case of parts replacement or maintenance. Check the machine in an authorised service centre at least once a year. Organise the disposal of waste materials complying scrupulously with current regulations. TECHNICAL DATA Machine height 140mm... -
Page 7: Spare Parts
NYLON EXTERNAL LEFT SIDE 20A HEXAGON PLUNGER INSERT BUTTON CH7 DAD2 LOW SQUARE NUT 4MA 20B HEXAGON PLUNGER CH7 CAF25 MACHINE BODY F25 20C SPRING LATCH FOR HEXAGON PLUNGER CH7 UNIVERSAL REAR BRUSH 20D HEXAGON PLUNGER EJECT BUTTON CH7 UNIVERSAL FRONT BRUSH... -
Page 8: Packaging Specifications And Dimensions
PACKAGING SPECIFICATIONS AND DIMENSIONS The F25 machine is delivered in a protective packaging. Ensure that the packaging is fully intact and that there are no signs of tempering when the product is taken over. In case of damage, the customer shall notify our customer service immediately. -
Page 9: Machine Assembly
MACHINE ASSEMBLY Follow the procedure below: The F25 machine has a fast assembly system since no tools are required. Do not use any tool to avoid injuries or damage to the machine. 1 Place the body of the machine on a stable surface without slopes. -
Page 10: How To Get Started
HOW TO GET STARTED The F25 machine is a mechanical collection device that can achieve excellent results even with the use of water without detergent. An excellent result is achieved with the use of specific detergents. The machine comes with universal brushes (gr 0.12). Anyway, it is possible to request specific brushes to our customer service according to the type of surface to be treated. -
Page 11: On/Off
ON/OFF Before the start-up of the device, check that the electrical cord and the machine are not malfunctioning in any way. If this is not the case, do not use the device and contact our service centre as soon as possible. 1 Insert the plug in a 230-volt wall outlet. -
Page 12: Functioning
FUNCTIONING Check that all steps described above have been completed correctly before using the machine. Before starting the washing procedure with the machine, remove any solid residual such as dust lumps, stones, glass, paper etc. from the surface which has to be treated. 1 After the engine has turned on, move the machine back and forth with linear movements. - Page 13 3 The recovery of the dispensed liquid occurs automatically by means of mechanical collection. The liquid will flow into the waste situated in the lower part of the machine. It is important to empty the waste when the seep liquid reaches the maximum mark printed on the back of the waste, thus avoiding an accidental release of the same.
-
Page 14: Transport
TRANSPORT To transport the machine safely, follow these steps: Check that the tank is placed in a vertical position before moving the machine. The electrical cord shall be unplugged from the outlet. 1 The machine has two rubber wheels situated in the lower part. - Page 15 1 Open the upper cover of the machine by pushing the two lateral hooks up. 2 Remove and empty the dirty water waste. Wash it with running water and, if necessary, use a spatula to remove any residual from the bottom. The stainless-steel sheet welded to the waste is not removable.
-
Page 16: Maintenance
MAINTENANCE A regular maintenance keeps the machine safe and always ready to use. Carry out the following operations: Before carrying out any operation, check that the electrical cord is unplugged from the outlet. 1 Keep the machine in a safe place to ensure its maintenance. -
Page 17: Troubleshooting Tips
4 Remove the brushes by pressing the button placed on the left side of the machine. Use a damp cloth to clean the internal sides of the machine while checking that seals are not clogged. Do not clean the machine with steam cleaners. TROUBLESHOOTING TIPS The following are examples of some problems that may arise. - Page 18 NOTES...
- Page 20 F.C.M. S.r.l. Via Lorenzo Lotto, 12 - Grumello Del Monte (BG) Italy tel +39 035.4491316 - fax +39 035.830912 info@floorwash.com...