GE WPRB9250 Technical Service Manual page 7

Clothes Care Cycles
START
■
After you have selected a new cycle, press once to start the cycle.
■
Press twice to select the last cycle used and start the washer.
■
If the washer is running, press once to pause the cycle; press again to continue
the cycle.
STOP
If the washer is running, press once to pause the cycle; press again to cancel
the cycle.
Time Remaining
■
Displays the approximate time remaining until the end of the cycle, or the time
remaining for DELAY START.
■
Cycle time is affected by how long it takes the washer to fill. This depends on the
water pressure in your home. The "smart" timer "learns" the amount of time it
takes to fill your washer and adjusts the total time accordingly.
PRESOAK
To presoak a load and go straight into a wash cycle:
Select your wash cycle, press the PRESOAK pad, then press the START pad.
■
Each time you press PRESOAK, you will add three minutes of agitation, followed by
12 minutes of soaking, for up to an hour of additional time. After the final soak
period, the selected wash cycle begins.
■
Uses the speed and water temperature of your selected wash cycle.
QUICK RINSE
Use this feature to quickly rinse chlorine, perspiration, stains, etc. out of clothes.
■
The washer fills with water, agitates for three minutes, drains and spins. You may
change the automatic settings if desired.
On some models, QUICK RINSE is found under the WASH CYCLES menu.
SPEED WASH
For lightly soiled items that are needed in a hurry. Cycle time is approximately
20 minutes, depending on your household water pressure.
– 5 –