Cleaning And Maintenance - Chicco Polly Magic Owner's Manual

How to close the highchair
Cómo colocar fermeture de la chaise haute
WARNING
Check that the frame is closed and the
wheels are locked and positioned in a
way that the frame can stand for
storage.
29
A
29
B
44
ADVERTENCIA
Verifique que la estructura se encuentre
cerrada y que las ruedas estén
bloqueadas y posicionadas de manera
que la estructura pueda mantenerse
parada para guardarla.
29A & 29B. Press the buttons at the
center of the side joints and, at the same
time, close the legs of the highchair using
your foot (diagram 29A).
29A y 29B. Presione los botones que se
encuentran en el centro de los
acoplamientos laterales y, al mismo
tiempo, cierre las piernas de la silla alta
usando su pie (diagrama 29A).

Cleaning and Maintenance

This product requires regular maintenance.
The cleaning and maintenance of the highchair
must only be carried out by an adult.
CLEANING
You can remove the seat pad for cleaning. To do so, unfasten the restraint harness and pull the seat
pad upward. You can spot clean the seat pad with a damp cloth and mild detergent. Do
not Machine Wash Seat Pad. Do not use bleach wipes or spray on the Pad or Plastics. Do
not bleach. Please refer to the care label for instructions on cleaning the fabric parts of the
highchair.
Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to
prevent the formation of rust if the highchair has come into contact with water. Important
for your child's safety do not remove the crotch bar from the tray.
MAINTENANCE
Lubricate the moving parts only if necessary, with a light application of a silicone based
lubricant. Periodically check the highchair for loose screws, worn parts, torn material or
stitching. Replace or repair the parts as needed. Use only Chicco replacement parts. To avoid
friction that may prevent the correct operation of the highchair, ensure that all the movable
plastic parts placed along the metal frame are clean of dust and dirt. Keep highchair in a dry
place. Prolonged exposure to direct sunlight may cause the fabric to fade and plastic parts to
warp.
45