Cisco 10008 Installation And Configuration Manual page 62

show pxf dma
show pxf dma
To display the current state of direct memory access (DMA) buffers, error counters, and registers on the
Parallel eXpress Forwarding (PXF) engine, use the show pxf dma command in privileged EXEC mode.
Cisco 10000 Series Router (PRE3 and PRE4)
Syntax Description buffers
counters
reassembly
registers
brief
config
errors
status
Command Modes Privileged EXEC
Command History Release
12.2S
12.3(7)XI
12.2(31)SB2
12.2(33)SB
Cisco 10008 Router PRE4 Installation and Configuration Guide
62
show pxf dma [buffers | counters | reassembly | registers]
show pxf dma [buffers | counters | reassembly | registers] [brief | config | errors | status]
(Optional) Displays PXF DMA buffers information.
(Optional) Displays packet and error counters for the PXF DMA engine.
(Optional) Displays PXF reassembly table usage information.
(Optional) Displays PXF DMA registers information.
(Optional) Displays PXF DMA information, including the initialization state
of each block in the PXF API and any errors that occurred.
Note
(Optional) Displays a configuration summary of the registers in each of the
PXF DMA blocks.
Note
(Optional) Displays the errors that occurred in each of the PXF DMA blocks.
Note
(Optional) Displays the initialization state of each PXF DMA block. In
normal operation, all blocks display the enabled state.
Note
Modification
This command was introduced.
This command was integrated into Cisco IOS Release 12.3(7)XI and
implemented on the Cisco 10000 series router for the PRE2.
This command was integrated into Cisco IOS Release 12.2(31)SB2 and
implemented on the Cisco 10000 series router for the PRE3.
This command was introduced on the PRE4 for the Cisco 10000 series
router.
This option is only available on the Cisco 10000 series router for the
PRE3 and PRE4.
This option is only available on the Cisco 10000 series router for the
PRE3 and PRE4.
This option is only available on the Cisco 10000 series router for the
PRE3 and PRE4.
This option is only available on the Cisco 10000 series router for the
PRE3 and PRE4.
OL-13840-01