Cisco 10008 Installation And Configuration Manual page 50

show pxf cpu access-lists
show pxf cpu access-lists
To display parallel express forwarding (PXF) memory information for access control lists (ACLs), use the
show pxf cpu access-lists command in privileged EXEC mode.
Cisco 10000 Series Router
Syntax Description security
tcam acl-name
detail
flex-sum
children
qos
pbr
compiled
Command Modes Privileged EXEC
Cisco 10008 Router PRE4 Installation and Configuration Guide
50
show pxf cpu access-lists [security | qos | pbr | compiled]
show pxf cpu access-lists [security [[tcam acl-name [detail]] | flex-sum | children] | qos | pbr |
compiled]
(Optional) Displays information about the security ACLs defined in
Cisco IOS and compiled to the PXF. Also displays information about split
ACLs, such as how much memory has been used.
(Optional) Displays information about the specified security ACL stored in
ternary content addressable memory (TCAM).
Note
(Optional) Displays decoded information about the packet fields used for
matching in the TCAM.
(Optional) Displays summary information describing the amount of memory
allocated in the parallel express forwarding (PXF) engine for use by the
flexible key construction microcode. This information is useful for design
teams.
Note
(Optional) Displays information for child policies. If an ACL is a template
child, the output typically does not display the child information. Specifying
the children keyword displays data for child policies, too, and shows the
children and the parent policy of each child.
Use caution when using the children keyword as there might be thousands
of child policies configured, which could have negative effects on the
command output.
(Optional) Displays information about the QoS ACLs defined in Cisco IOS
and compiled to the PXF.
(Optional) Displays information about ACLs for policy-based routing (PBR).
(Optional) Displays information for all compiled Turbo-ACLs.
The PRE2 supports Turbo-ACLs and the compiled option. The PRE3 and
PRE4 accept the PRE2 compiled option, but do not implement Turbo-ACLs.
This option is only available on the PRE3 and PRE4 for the Cisco
10000 series router.
This option is only available on the PRE3 and PRE4 for the Cisco
10000 series router.
OL-13840-01