Page 1
Technical manual BA 0414 GSM-3000 Data remote transmission module for measuring value remote data transmission and remote alarming from water level sensors with data memory Remote data transmission by wireless GSM communications network Remote data transmission by GPRS to FTP server Quad band –...
Only the water level sensor is mounted in the water level tube. Integrated over voltage protection modules prevents the destruction of the RDT module caused by atmospheric influences like e.g. thunder strike. ACS-CONTROL-SYSTEM GmbH | Lauterbachstr. 57 | D- 84307 Eggenfelden | www.acs-controlsystem.de | info@acs-controlsystem.de | 2 |...
The correct function of the device within the specific technical data can only be guaranteed, if the permitted environmental and process temperatures will not be exceeded. ACS-CONTROL-SYSTEM GmbH | Lauterbachstr. 57 | D- 84307 Eggenfelden | www.acs-controlsystem.de | info@acs-controlsystem.de | 3 |...
Page 4
This can lead to abnormal behavior, reduced run time or image 7 destruction of the device. ACS-CONTROL-SYSTEM GmbH | Lauterbachstr. 57 | D- 84307 Eggenfelden | www.acs-controlsystem.de | info@acs-controlsystem.de | 4 |...
To protect the contacts put again the cap onto the interface socket and push it till to the stop. By this the contacts of the interface socket are sealed watertight. ACS-CONTROL-SYSTEM GmbH | Lauterbachstr. 57 | D- 84307 Eggenfelden | www.acs-controlsystem.de | info@acs-controlsystem.de | 5 |...
Please Wait connection to a PC by cable, because it is busy at the moment with a running Busy process, e.g. a data remote transmission. ACS-CONTROL-SYSTEM GmbH | Lauterbachstr. 57 | D- 84307 Eggenfelden | www.acs-controlsystem.de | info@acs-controlsystem.de | 6 |...
Page 7
At a longer standby time the battery capacity of the RDT module can also be requested, to go to the measurement place by the time for a battery change. ACS-CONTROL-SYSTEM GmbH | Lauterbachstr. 57 | D- 84307 Eggenfelden | www.acs-controlsystem.de | info@acs-controlsystem.de...
Page 8
(e.g. at standby time 2 minutes) Error 100 Communication error between RDT module and water level sensor Parse Error SMS command code wrong or incomplete ACS-CONTROL-SYSTEM GmbH | Lauterbachstr. 57 | D- 84307 Eggenfelden | www.acs-controlsystem.de | info@acs-controlsystem.de | 8 |...
Page 9
For a single standby time at a defined start time, this can be achieved by setting the interval time to a very high value, e.g. 99 weeks. ACS-CONTROL-SYSTEM GmbH | Lauterbachstr. 57 | D- 84307 Eggenfelden | www.acs-controlsystem.de | info@acs-controlsystem.de...
Page 10
(OFF, PL, PH, AL, AH) GGBA get GPRS carrier APN (access point name) GGBU get GPRS carrier user name GGBP get GPRS carrier password ACS-CONTROL-SYSTEM GmbH | Lauterbachstr. 57 | D- 84307 Eggenfelden | www.acs-controlsystem.de | info@acs-controlsystem.de | 10 |...
Page 11
SALHT set alarm limit high temperature SALLT set alarm limit low temperature SAHHT set alarm hysteresis high temperature SAHLT set alarm hysteresis low temperature ACS-CONTROL-SYSTEM GmbH | Lauterbachstr. 57 | D- 84307 Eggenfelden | www.acs-controlsystem.de | info@acs-controlsystem.de | 11 |...
Page 13
This can lead to abnormal behavior, reduced run time or destruction of the device. ACS-CONTROL-SYSTEM GmbH | Lauterbachstr. 57 | D- 84307 Eggenfelden | www.acs-controlsystem.de | info@acs-controlsystem.de | 13 |...
A returning must be refrained, if it is not possible by 100% to remove the unhealthily product completely, because e.g. it is penetrate into cracks or is diffused through plastic. ACS-CONTROL-SYSTEM GmbH | Lauterbachstr. 57 | D- 84307 Eggenfelden | www.acs-controlsystem.de | info@acs-controlsystem.de | 14 |...
Filler cap for installation on water level tube G 6“ – ISO 228-1 / DIN 259 Clasp: 6– edge clasp 5– edge–security clasp GSM-3000 0 _ _ Installation material and connection cable are not enclosed in the delivery contents. ACS-CONTROL-SYSTEM GmbH | Lauterbachstr. 57 | D- 84307 Eggenfelden | www.acs-controlsystem.de | info@acs-controlsystem.de | 17 |...
Need help?
Do you have a question about the GSM-3000 and is the answer not in the manual?
Questions and answers