Advertisement
2 Click File>setup connection.
Click Disconnect and Select the correct comport. Click Connect and Close.
Note the "Receive – success" message on the status bar.
2.3 Uploading new flash software to the ISDN IWU card.
Click Advanced and select Load Flash.
3
An Flashload dialog box appears.
4 Click Start and select the file to be downloaded and click open.
5 The download starts shortly after ant takes 4 to 5 minutes. The entire KWS1500 needs to
be restarted after the download.
14129600-HD, Ed.008/ Page 8
Advertisement
Need help?
Do you have a question about the KIRK ISDN and is the answer not in the manual?
Questions and answers