Installing Antenna; Installing Belt Clip - Vector VT-44 Turbo Manual

CHARGING NOTES (2)
Plug the AC adapter into the back of the charger.
Then plug the power cable of the adapter into
220V power.
Slide the Li-ion battery pack or radio with a Li-ion battery
pack into the charger.
● Make sure the battery pack is in connected with the
charging terminals.
● When charging begins, the RED LED light displays.
● When the battery pack is charged to its greatest
capacity, GREEN LED light displays.
4 READY TO WORK

INSTALLING ANTENNA

Attach the antenna to the radio as illustrated
on the right.

INSTALLING BELT CLIP

Attach the belt clip with the supplied screws
using a phillips screw driver.
To attach the belt clip
READY TO WORK 5