Wi-Fi tethering
Tethering function that connects Wi-Fi
compatible devices to the Internet via networks
of this FOMA terminal by using the FOMA
terminal as a Wi-Fi access point is available.
You can connect to up to five Wi-Fi compatible
devices simultaneously.
This function is available inside the FOMA
service area. However, this function may be
interrupted depending on the conditions on
communications or on network congestion.
This function is not available when miniUIM is not
inserted or in cases in which the FOMA service is
canceled or stopped.
1
In the home screen,
[Settings]/[Wireless &
networks]/[Portable hotspot]
2
Select an item
Portable Wi-Fi
hotspot: Enable the Wi-Fi
tethering.
Check the details of the precautions before
use.
Portable Wi-Fi hotspot
tethering settings such as network SSID and
security.
[Configure Wi-Fi hotspot]/set each
[Save] to set Wi-Fi hotspot. Set security
setting if necessary. The security setting
supports WPA2 PSK.
Help: Display Help information.
[R]/
settings: Set the Wi-Fi
item/
Call settings
Set call such as voice mail, reject calls, etc.
1
In the home screen,
[Settings]/[Call settings]
2
Select an item
Any key answer
you press | on receiving a call.
Auto
answer: Set to answer a call
automatically when an earphone is
connected.
Calling display
screen during a call.
Call/Ans
Memo: Play or set Call/Answer
Memo. If you set Answering Memo, the
FOMA terminal answers a call and records
the caller's message when you cannot
answer.
Int'l call
settings: Check country codes.
Call
blocking: Set Call blocking.
[Specified numbers]/z/[Edit] to save
the specified phone number.
NWService: For details nP. 74
Accounts: Set an account of Internet call.
Use Internet
Internet call.
[Any key answer settings]
Following items can be set.
Answer: Press | on receiving a call to
answer it.
Quick silent: Press | on receiving a call to
temporarily stop the ring tone or vibration.
OFF: Operation is not available by pressing
| on receiving a call.
12
[R]/
settings: Set an action when
setting: Set the display in the
calling: Set whether to use
Various Settings
81
Need help?
Do you have a question about the aquos SH-01D and is the answer not in the manual?