Related Manuals for ID View IV-THM42F25
Summary of Contents for ID View IV-THM42F25
-
Page 1: User Manual
Thermal Imaging Integrated Network Camera User Manual IV-THM42F25 12000 Ford, Suite110, Dallas, TX 75234 Tel: 972-247-1203 Fax: 972-247-1291 www.idview.com... -
Page 3: Symbol Description
Thermal Imaging Integrated Network Camera User Manual Precautions Precautions Precautions Fully understand this document before using this device, and strictly observe rules in this document when using this device. If you install this device in public places, provide the tip "You have entered the area of electronic surveillance" in an eye- catching place. - Page 4 Thermal Imaging Integrated Network Camera Precautions User Manual Strictly conform to local electrical safety standards and use power adapters that are marked with the LPS standard when installing and using this device. Otherwise, this device may be damaged. Use accessories delivered with this device.
- Page 5 Thermal Imaging Integrated Network Camera User Manual Precautions Use a soft and dry cloth to clean the device body. In case that the dirt is hard to remove, use a dry cloth dipped in a small amount of mild detergent and gently wipe the device, and then dry it again.
-
Page 6: Table Of Contents
Thermal Imaging Integrated Network Camera Contents User Manual Contents 1 Product Overview ....................1 1.1 Thermal Imaging Principles and Advantages ..............1 1.2 Device Structure ......................1 1.3 Cable Connection ......................3 1.4 Functions and Features ....................4 2 Device Dimensions ....................5 3 Installation ........................ -
Page 7: Product Overview
Thermal Imaging Integrated Network Camera 1 Product Overview User Manual Product Overview 1.1 Thermal Imaging Principles and Advantages For any object, as long as its temperature is above the absolute zero (-273.15°C), although the object does not give out light, it can radiate infrared. The infrared is also known as thermal radiation. - Page 8 Thermal Imaging Integrated Network Camera 1 Product Overview User Manual Figure 1-1 Appearance and interfaces of the thermal imaging integrated network camera Table 1-1 Interfaces Physical Interface Connection Reset button The configuration resumes to the factory settings (RESET) after you press the reset button for 3s. The default value is 192.168.0.120.
-
Page 9: Cable Connection
Thermal Imaging Integrated Network Camera 1 Product Overview User Manual 1.3 Cable Connection Figure 1-2 the multi-connector combination cable of the thermal imaging integrated network camera. For details about the multi-connector combination cable, see Table 1- Figure 1-2 Multi-connector combination cable Table 1-2 Multi-connector combination cable Core of Cable Functions... -
Page 10: Functions And Features
Thermal Imaging Integrated Network Camera 1 Product Overview User Manual Core of Cable Functions Connection signals from the sound pick-up device. Audio output Connects to the external audio device such as the voice box. Brown RS485RS+ RS485 interface, connects to the external pan&tilts. -
Page 11: Device Dimensions
Thermal Imaging Integrated Network Camera 2 Device Dimensions User Manual Device Dimensions Figure 2-1 shows the dimensions of the thermal imaging integrated network camera. Figure 2-1 Dimensions (unit: mm) Issue V1.0 (2014-01-10) -
Page 12: Installation
Thermal Imaging Integrated Network Camera 3 Installation User Manual Installation 3.1 Preparations You may need the tools and accessories shown in Table 3-1 during the installation (you need to prepare the tools by yourself, and the accessories are in the package of the camera). -
Page 13: Installation Mode
Thermal Imaging Integrated Network Camera 3 Installation User Manual 3.2 Installation Mode The thermal imaging integrated camera can be installed on the ceiling or the wall. You can select the appropriate installation according to your requirements. If the camera needs to be installed on the cement wall, you need to install the expansion screws (the mounting holes of the screws must be consistent with that of the support), and then install the support. - Page 14 Thermal Imaging Integrated Network Camera 3 Installation User Manual Step 3 Fix the installation base on the wall, as shown in Figure 3-2. Figure 3-2 Fixing base Step 4 Hang the integrated camera into the base along the guide slots and rotate it to a certain angle to facilitate cable connection, as shown in Figure 3-3.
- Page 15 Thermal Imaging Integrated Network Camera 3 Installation User Manual Figure 3-4 Aligning at the base Step 6 Fix the integrated camera to the installation base, as shown in Figure 3-5. Figure 3-5 Fixing the integrated camera to the installation base Step 7 Align the focusing fixture at the lens grooves, clamp a proper position, grasp the handle portion of the fixture, and focus along the direction of arrows, as shown in Figure 3-6.
- Page 16 Thermal Imaging Integrated Network Camera 3 Installation User Manual Figure 3-6 Focusing Focusing fixture Step 8 Adjust the surveillance angle, as shown in Figure 3-7, and then fix the screws. Figure 3-7 Adjusting the surveillance angle Screws 3 Screws 2 Screws 1 1.
-
Page 17: Quick Configuration
Thermal Imaging Integrated Network Camera 4 Quick Configuration User Manual Quick Configuration 4.1 Login and Logout You must use Internet Explorer 6 or a later version to access the web management system; otherwise, some functions may be unavailable. Login system Step 1 Open the Internet Explorer, enter the IP address of IP camera (default value: 192.168.0.120) in the address box, and press Enter. -
Page 18: Main
Thermal Imaging Integrated Network Camera 4 Quick Configuration User Manual The main page is displayed. ----End logout To logout of system, click Sign out in the upper right corner of the main page, the login page is display after you log out of the system. 4.2 Main page layout On the main page, you can view real-time video, set parameter, Video parameter, Video control, PTZ control, PTZ Configure and log out of the system. -
Page 19: Browsing Video
Thermal Imaging Integrated Network Camera 4 Quick Configuration User Manual Element Description Video control You can perform the following operation in this area: area Switch between cameras. Start or stop playing Videos. Start or stop playing audio. ... - Page 20 Thermal Imaging Integrated Network Camera 4 Quick Configuration User Manual In the display dialog box, click Add, as shown in Figure 4-3. Figure 4-3 Adding the a trusted site Step 2 In the Internet Explorer, choose Tool > Internet Options > Security > Customer level, and set Download unsigned ActiveX control and initialize and script ActiveX controls not marked as safe for scripting under ActiveX controls and plug-ins to Enable, as shown in Figure 4-4.
-
Page 21: Download The Right Control In The Internet Explorer
Thermal Imaging Integrated Network Camera 4 Quick Configuration User Manual The login page is display when the control is loaded. 4.3.2 Download the right control in the Internet Explorer Preparation User uses the Internet Explorer browse video. Real-time video page pop-ups the message “clicks to play live video with ActiveX ... -
Page 22: In The Google, Firefox, Or Safari Browsers Watch Real-Time Video
Thermal Imaging Integrated Network Camera 4 Quick Configuration User Manual Figure 4-6 Download control tips Click the message “click to play live video with ActiveX control to reduce latency”, jump download Adobe Flash Player Plugin control interface, once downloading is complete, you can watch video screen. - Page 23 Thermal Imaging Integrated Network Camera 4 Quick Configuration User Manual Default gateway Dynamic Host Configuration Protocol (DHCP) Preferred Domain Name System (DNS) server Alternate DNS server Procedure Step 1 Choose Device Configuration > Local Network. The Local Network page is displayed, as shown in Figure 4-7. Figure 4-7 Local Network page Step 2 Set the parameters according to Table 4-2.
-
Page 24: Parameter Description
Thermal Imaging Integrated Network Camera 4 Quick Configuration User Manual Parameter Description Setting Device obtain an The device automatically [Setting method] IP address obtains the IP address from the Click the option button. automatically DHCP server. NOTE To query the current IP address of the device, you must query it on the platform based on the... - Page 25 Thermal Imaging Integrated Network Camera 4 Quick Configuration User Manual If you set only the Subnet Mask, Default Gateway, Preferred DNS Server, and Alternate DNS Server parameters, you do not need to log in to the system again. You can click Reset to set the parameters again if required.
-
Page 26: Parameter Setting
Thermal Imaging Integrated Network Camera 5 Parameter Setting User Manual Parameter Setting 5.1 Sensor Configuration Interface Operation Procedure Step 1 On the Internet Explorer interface or the client software interface, select and right-click the surveillance image to the set, as shown in Figure 5-1. Figure 5-1 Sensor configuration Step 2 Choose Sensor Configuration. - Page 27 Thermal Imaging Integrated Network Camera 5 Parameter Setting User Manual Table 5-1 lists the image setting parameters. Table 5-1 Image setting parameters Parameter Description Setting The temperatures of the temperature fields detected by the thermal imaging camera are separately mapped to values ranging from 0 to 255 by the algorithm.
-
Page 28: Fec Mode
Thermal Imaging Integrated Network Camera 5 Parameter Setting User Manual Parameter Description Setting Off: the image is not flipped. Select from the drop-down list Horizontal: the image is flipped left and right. box. Vertical: the image is flipped up and down. [Default value] Horizontal + vertical: the image is rotated at 180 degree. - Page 29 Thermal Imaging Integrated Network Camera 5 Parameter Setting User Manual Parameter Description Setting image is displayed. After the FFC is complete, the image is automatically recovered. Repeated FFC operations can prevent the grainy and image degradation problems. The FFC is especially important when the temperature of the camera changes.
-
Page 30: Dnr
Thermal Imaging Integrated Network Camera 5 Parameter Setting User Manual Parameter Description Setting [Default value] Manual: In the manual or external FFC mode, the camera does not automatically perform the Flat Field FFC based on the temperature change or the Correction specified period. -
Page 31: Lens Control
Thermal Imaging Integrated Network Camera 5 Parameter Setting User Manual 5.5 Lens Control Figure 5-5 shows the lens control interface. Figure 5-5 Lens control interface The electrical focusing lens can be controlled and adjusted. Issue V1.0 (2014-01-10) -
Page 32: Technical Specifications
Thermal Imaging Integrated Network Camera 6 Technical Specifications User Manual Technical Specifications Table 6-1 lists the specifications of the thermal imaging integrated camera. Table 6-1 Technical specifications Type Parameter Description Uncooled infrared focal plane Detector type sensor Sensing mode Microbolometer Pixel 420x315 Detector... - Page 33 Thermal Imaging Integrated Network Camera 6 Technical Specifications User Manual Type Parameter Description Output resolution D1/CIF Imaging feature Frame rate 30 fps Video compression H.264BP/MP/HP/MJPEG format Audio compression G711, AMR, and RAW_PCM format Coding features Multiple code streams Support Bit rate control CBR/VBR Adjustment of code 50 Kb to 4 Mb...
- Page 34 Thermal Imaging Integrated Network Camera 6 Technical Specifications User Manual Type Parameter Description Mobile detection alarm, I/O alarm, Intelligent alarm and disk alarm Heartbeat mechanism Support Local storage, NAS storage, and Storage SD card storage Privacy mask 5 areas with configurable size Time, date, channel No., channel System function Character display...
-
Page 35: A Hazardous Substance Declaration
Error! Use the Home tab to apply 标题 7 to the text that you want to appear here.Error! Use the Home tab to apply 标题 7 to the text Thermal Imaging Integrated Network Camera User Manual that you want to appear here. Hazardous Substance Declaration Hazardous Substance or Element Hexavalent...