Operators Manual GT3011 CBE911423 Original instruction WARNING: Read the instructions before using the product Before initial start-up, please read through these operating instructions carefully prior to using the machine. Keep the instructions safe and pass them on to any subsequent user so that the information is always available.
General Safety Rules Electrical Information Symbols Know Your String Trimmer Assembly 12-13 Operation Maintenance 15-16 Troubleshooting Disposal and Recycling Warranty SPECIFICATIONS Grass Trimmer GT3011 Type Corded Voltage 220-240 V~50Hz Power 530W Speed 9700 RPM Line Size 1.4mm Cutting Swath 300mm...
GENERAL SAFETY RULES IMPORTANT When using equipment, the following safety precautions must be followed to avoid injuries and damage. • Read all operating instructions carefully and comply with them. It is important to understand these instructions and to acquaint yourself with the machine, its correct usage and all safety requirements.
Page 4
GENERAL SAFETY RULES • Switch on the motor only when yours hands and feet are a safe distance from the cutting means. • Never fit metal cutting elements to this trimmer. • Use only the manufacturer’s recommended replacement parts and accessories. •...
Page 5
GENERAL SAFETY RULES ATTENTION Danger. The cutting line continues to rotate for a few moments after the motor is switched off. SAVE THESE INSTRUCTIONS FOR USE AT A LATER DATE Precautionary Measures Work area • Do not expose the appliance to rain. Do not use the appliance in damp or wet conditions.
Page 6
GENERAL SAFETY RULES After use • Switch off, remove the plug from the socket and ensure that moving parts have stopped rotating before leaving the appliance unattended and before changing, cleaning or inspecting any parts of the appliance. • When not in use, the appliance should be stored in a dry place and out of reach of children.
GENERAL SAFETY RULES • Switch on the appliance only when hands and feet are at a safe distance from the cutting line. • Avoid any body contact with the cutting line while the appliance is running. • Do not work on steep slopes, be sure of your footing. Be aware that freshly cut grass is damp and slippery.
Page 8
ELECTRICAL INFORMATION WARNING USE ONLY IDENTIFICAL REPLACEMENT PARTS WHEN SERVICING THE GRASS TRIMMER, TO AVOID INJURY. WARNING DOUBLE INSULATION DOES NOT TAKE THE PLACE OF NORMAL SAFETY PRECAUTIONS WHEN OPERATING THIS GRASS TRIMMER. WARNING TO AVOID ELECTROCUTION: 1. Use only identical original replacement parts when servicing a tool with double insulation.
Page 9
ELECTRICAL INFORMATION CAUTION ALWAYS MAKE SURE THAT YOUR OUTLET IS PROPERLY GROUNDED. IF UNCERTAIN, HAVE IT CHECKED BY A CERTIFIED ELECTRICIAN. WARNING THIS GRASS TRIMMER IS FOR OUTDOOR USE ONLY. DO NOT EXPOSE TO RAIN OR USE IN DAMP LOCATIONS. Make sure your extension cord is properly wired and in good electri- cal condition.
Page 10
SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. Precaution that involve your safety You must read the operating instructions carefully. Pay attention that bystanders are not injured by objects thrown out from the machine.
KNOW YOUR STRING TRIMMER KNOW YOUR STRING TRIMMER (See Figure 1.) The safe use of this product requires an understanding of the information on the product and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.
Page 12
ASSEMBLY WARNING Before assembly, make sure that the grass trimmer is switched off and unplugged. Fitting the guard (See Figure 2 & Figure 4.) 1. Position housing on machine as indicated 2. Rotate housing into correct location 3. Fix housing with the screws 4.
Page 13
ASSEMBLY Adjusting suitable cutter position (See Figure 7 & Figure 9.) 1. Unscrew tube lock ring. 2. Slide tubing to desired length 3. Tighten tube lock ring. 4. Press motor housing angle button to pivot into desired cutting position (fig 9). Release button. (This facilitates cutting under obstacles).
Page 14
OPERATION After starting trimmer, allow motor to turn over for a few seconds before cutting grass. Cutter wire automatically adjusts length of the two ends of wire. Now you can start work. If wire is finished up, you cannot achieve desired cut. You should occasionally tap cutter head on the ground to feed extra wire.
Page 15
MAINTENANCE Your grass trimmer has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning. WARNING Before performing any maintenance, switch off and unplug the tool. •...
Page 16
MAINTENANCE WARNING If the cutting lines protrude beyond the trimming blade, cut them off so that they just reach the blade. Winding new line onto a spool (See Figure 16 & Figure 17 & Figure 18.) • Only use 1.4mm replacement line •...
TROUBLESHOOTING If your grass trimmer seems not to operate properly, follow the instruction below. If this does not solve the problems, please contact your local agreed Service Center WARNING Before proceeding, switch off and unplug. Tool runs slowly • Check that the spool housing can rotate freely. Carefully clean it if necessary. •...
Page 18
WARRANTY We recommend you check the product is in good condition immediately after purchase and read the instructions carefully before use. In no cases can the guarantee give rise to a refund of direct or indirect damages or liabilities of any sort.
Bruno VAN ELSLANDE, General Manager, the person authorized to compile the technical file : Yuxi WANG, quality engineer declare that the following product under brand : LAAWA (Factory model: GT3011 / GARDIF Ref. : CBE911423) product model : Electric Grass Trimmer 530W GT3011...
Need help?
Do you have a question about the GT3011 and is the answer not in the manual?
Questions and answers