Cadillac CTS 2008 Owner's Manual page 394

Table of Contents

Advertisement

12. The tire is not sealed and will continue to leak
air until the vehicle is driven and the sealant is
distributed in the tire.
Steps 11 through 18 must be done right after
Step 10.
13. Unplug the air compressor accessory plug (F) from
the accessory power outlet in the vehicle.
14. Disconnect the sealant/air hose from the tire valve
stem or tire pressure monitoring sensor cap, by
turning it counterclockwise, and replace the
tire valve stem cap.
Be careful when handling the tire inflator
components as they may be hot after usage.
15. Wrap the sealant/air hose around the air
compressor channel to stow it in its original location.
16. Wrap the air compressor accessory plug (E)
back into place.
5-88
Place it in a highly visible location such as the
inside of the upper left corner of the windshield or
to the face of the radio/clock.
The maximum speed label reminds you to drive
cautiously and not to exceed 55 mph (90 km/h) until
you have the damaged tire inspected and repaired.
17. If the flat tire was
able to inflate to the
recommended inflation
pressure, remove the
maximum speed label
from the sealant
canister.

Advertisement

Table of Contents
loading

Table of Contents