Attaching The Band - Empatica E4 User Manual

Attaching the band

Follow these steps to attach the band:
1 - Slide loop towards the case.
2 - Place the E4 top-down on a surface.
5 - Wrap the band over snaps and tighten.
6 - To secure, connect one snap at a time.
7 - If too tight, loosen by one snap.
22
3 - Wrap the band around the wrist.
4 - Line up the snaps under the middle and ring fingers.
8 - The E4 should fit snugly above the wrist joint.
9 - Press the button to power on the E4.
empatica 2015
©