Advertisement
MANUAL ENGLISH
PREPARATIONS
ASSEMBLY AND INSTALLATION
1.
Select a suitable location for assembly of the receiver.
2.
Connect the Positive (+). (BLACK 2)
3.
Connect the ground cable of the receiver (YELL/GR)
4.
Connect the first coil (BLACK 3)
4.
The black cable (4) is to connect a second coil when using a
3P/4W valve. If not used please protect or cut off.
5.
Place a fuse between the receiver and the battery to prevent
damage from short circuits to the receiver.
Rev 1 date 26-04-11 RS
4-8
Advertisement
