Advertisement
Available languages
Available languages
GE
Lighting
Lumination
LTQ Series Global Adapter
When installing or using this track system, basic safety precautions should always be followed, including the following:
1. Turn off power at fuse circuit breaker box before installation or before doing any maintenance work.
2. Wear rubber soled shoes and work on a sturdy wooded or non-conductive ladder.
3. Product must be mounted in location and at height in a manner consistent with its intended use, and in compliance with
National Electrical Code and local building codes.
4. For Indoor use only.
5. Do not exceed the nominal supply voltage or amperage ratings.
6. Do not install any lampholder closer than 6".
7. WARNING:
installation.
8. CAUTION:
120V systems.
9. The track and all components are rated for 120V, 20A capacity. (2400W max)
10. Do not exceed the nominal supply voltage or amperage rating.
11. To avoid hazard to children, account for all parts and properly dispose of all packing materials.
12. Read all instructions
13. Do not install this track in damp or wet locations.
14. Do not cut any track sections.
16. Do not install any luminaire assembly closer than 6 inches from any curtain, or similar combustible material.
shock, do not attempt to connect power tools, extension cords, appliances, and the like to the track.
19. Do not connect a track to more than one branch circuit unless the track is constructed so that it can be used with more than
BEFORE YOU BEGIN
Read these instructions completely and carefully.
FOR USE WITH CEILING MOUNTED TRACK ONLY.
READ TRACK MANUFACTURER'S INSTALLATION
INSTRUCTIONS FOR GUIDELINES ON TRACK
INSTALLATION.
LED Track Light
TM
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING
RISK OF ELECTRIC SHOCK
Turn power off before inspection, installation or removal.
Global series GES, Halo Series L64X, or L65X track systems.
Installation Guide
CAUTION
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for GE Lighting Lumination LED Track Light
Summary of Contents for GE Lighting Lumination LED Track Light
-
Page 1: Before You Begin
Installation Guide Lighting Lumination LED Track Light LTQ Series Global Adapter IMPORTANT SAFETY INSTRUCTIONS When installing or using this track system, basic safety precautions should always be followed, including the following: 1. Turn off power at fuse circuit breaker box before installation or before doing any maintenance work. 2. -
Page 2: Fixture Installation
L-TQ- Input Voltage 120V Frequency 60Hz Fixture Installation Polarity line Locking tab Rotate Locked Track Hold the adapter below the track Rotate adapter 90 degrees Release the locking tab and the with your thumb on the locking clockwise, making sure the tab. - Page 3 Guide d’installation Lighting Luminaire à LED sur rail Lumination ™ (LTQ Series Global Adapter Consignes de sécurité importantes Lors de l’installation ou de l’utilisation de ce système sur rail, suivez toujours les précautions élémentaires de sécurité, notamment les consignes suivantes : 1.
- Page 4 Réf L-TQ-A-ID-1-xx-xx-x-xx-x-x-G1-xxxx Tension d’alimentation 120V Fréquence 60Hz Installation du luminaire Languette de Ligne de polarité Tourner verrouillage Verrouillé Rail Maintenez l’adaptateur sous le rail Tournez l’adaptateur à 90 degrés Relâchez la languette de avec votre pouce sur la languette dans le sens horaire, en veillant verrouillage et le luminaire devrait de verrouillage.
Need help?
Do you have a question about the Lumination LED Track Light and is the answer not in the manual?
Questions and answers