USER MANUAL LED BLADEP186 MKIII Please read this user manual before using this product...
Page 3
Introduction Thank you for purchasing the MICROH DJ LED BLADEP186 MKIII. For your own safety and knowledge, please read this manual before installing or operating this device. This manual covers the important information on installation and applications. Please install and operate the fixture according to instructions.
Safety Warning • Every person involved with the installation, operation and maintenance of this device must be qualified. • User/installer must follow the instructions of this manual. • Unqualified persons must not open the housing cover and operate the device, or the dealer will not accept liability for any resulting defects or problems.
Improper installation can result in bodily injury or damage. Clamp Mounting: The MICROH DJ LED BLADEP186 MKIII provides a unique mounting bracket assembly that integrates 2 brackets to be used to mount on a truss or the floor.
Page 6
Regardless of the rigging option you choose for your LED BLADE P186 MKIII, always be sure to secure your fixture with a safety cable. The fixture provides a built-in rigging point for a safety cable on the hanging bracket as illustrated above. Be sure to only use the designated rigging point for the safety cable and never secure a safety cable to a carrying handle.
DMX512 Control Data Connection: This fixture complies with international USITT DMX standards and can be used with a 3 pin DMX connector. Plug in the 3 pin XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-pin XLR input of the LED battery par light.
Menu Display Number Display Show Function d001-d512 DMX mode CHnd 4 or 8 channel selection Auxx/Soxx Au01-Au08: RGBW Colour mixing Au09: Colour jumping Au10: Colour fade So01-So02: Sound mode St00 St00: Master to strobe St00:-St16: Strobe slow to fast SP00-SP16 Colour jumping and colour gradient speed (slow to fast) R000-R255...
DMX Modes 4CH Mode Channel Value Function 000-255 Red Dimmer 000-255 Green Dimmer 000-255 Blue Dimmer 000-255 White Dimmer 8CH Mode Channel Value Function 000-255 Red Dimmer 000-255 Green Dimmer 000-255 Blue Dimmer 000-255 White Dimmer 000-014 No function 015-029 Single colour strobe 030-044 Multicolour strobe...
Maintenance and Cleaning The following points have to be considered during the inspection: All screws for installing the device, or parts of the device must be tightly connected, and must not be corroded. There must not be any deformations on the housing, colour lenses, fixations or installation spots (ceiling, suspension, trussing).
Page 12
For more information please contact: www.microhdj.com info@microhdj.com 905.428.9062...