Motorola P6KU1 Instruction Manual page 103

117R
Mounting external memory card (Micro-SD
)
① Slide and open the external memory cover
as shown in the figure.
Insert the external memory (Micro
②
shown in the figure.
· Be sure that the external memory is inserted
to the correct direction, or the slot can be
damaged.
· Icon is displayed on the standby screen when
the external memory is mounted properly.
③ Close the external memory cover and slide it
as shown in the figure.
· Do not turn off the phone while using the data stored in the external memory card.
- The data in the card can be erased.
· Insert the external memory card and restart it, if you first use
the card or if there is an error on the card.
· Keep the external memory card in the safe place.
- Do not give impact or bend the card.
- Keep the card away from hot and humid place, the place with corrosive material or the
place with magnetic wave or static electricity.
-SD) as
Note
· When using the external memory card, you can only use some certain functions and other
functions are restricted.
· End the USB mass storage before you remove the external memory card.
- A critical system error or defect may occur.
· Motorola takes no responsibility on loss or damage of data caused due to negligence or
mishandling of the user.
· This product supports up to 4GB capacity of Micro-SD.