Related Manuals for Zte CDMA20001X EV-DO
Summary of Contents for Zte CDMA20001X EV-DO
- Page 1 CDMA2000 1X EV-DO Wireless Data Terminal User Guide CDMA2000 1X EV-DO Wireless Data Terminal User Guide This User Guide is used for Wireless Data Terminal of AC2787. ZTE Corporation http://www.zte.com.cn...
- Page 2 No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. ZTE Corporation reserves the right to make modifications on print errors or update specifications in this manual without prior notice. ZTE Corporation...
- Page 4 CDMA2000 1X EV-DO Wireless Data Terminal User Guide 1. Introduction Thank you for choosing ZTE Corporation‟s CDMA2000 Wireless Data Terminal (hereinafter referred to as Data Terminal). Data Terminal supports both CDMA2000 1X EV-DO and CDMA2000 1X network. In the area where there is signal, it allows you to go surfing on the Internet, send &...
-
Page 5: Insert R-Uim Card
Note: If your data terminal doesn‟t need R-UIM card, please skip this section. 1. Pull out the tap； 2. Take out the R-UIM card cover in the direction indicated by the arrow； 3. Insert R-UIM card as below figure； ZTE Corporation http://www.zte.com.cn... -
Page 6: Install And Uninstall
USB interface Optical Drive CD-ROM (for installation only) Memory 64 MB Disk Space 50 MB (used for installation of application) 4.2 Installation Guide Take Windows XP for example. Under other operating systems, please refer to the installation ZTE Corporation http://www.zte.com.cn... -
Page 7: Run The Application
The icons on the interface are used to access the function, which indicate as below: Connect Value Add Voice Call Voice Log Short Message Connect Phone book Net Log Setting Help Status Bar: ZTE Corporation http://www.zte.com.cn... - Page 8 Please connect the Data Terminal and PC with USB extension cable under weak signal to obtain the optimal performance. If necessary, adjust the Data Terminal's position and the antenna's direction. Disconnect After connecting to Internet, click ZTE Corporation http://www.zte.com.cn...
-
Page 9: Connection Records
“Backspace” to delete the previous input digit; keyboard. Press button or press “Esc” to clear all the inputs. press button in the right side of the interface or press “Enter” to make a call. Click ZTE Corporation http://www.zte.com.cn... -
Page 10: Call History
During three-way conference call, click “Hangup second call” button to end the conference call, and return to the original call. 9. Call History (If this feature is not supported by your Data Terminal, please skip over this chapter.) ZTE Corporation http://www.zte.com.cn... -
Page 11: Short Message
Add more recipients if you like. Select priority. Click button to send a message. Click button to save the text into Draftbox. The received messages will be saved in the Data Terminal In-box. ZTE Corporation http://www.zte.com.cn... -
Page 12: Phone Book
Phone book. You could select to save the contacts in the PC, Normal (Data Terminal), R-UIM and Emergent. Take “Save the call history in PC” for example in the following: then input the contents and select “OK” to add a new contact. Click Edit ZTE Corporation http://www.zte.com.cn... - Page 13 12. Setting Click to enter the setting interface. Network Connection Setting Set the network parameters (phone number, username, password), work mode, etc. After the setting, click “Apply” button to save the settings on the current interface. ZTE Corporation http://www.zte.com.cn...
- Page 14 After clicking “Service”, you could set “Busy Forwarding”, “No answer forwarding”, “Unconditional forwarding”, “Call waiting”, etc. Double-click the selected option to modify the service number and forwarding number. After the setting, click “call” button to send the corresponding request to the network system. ZTE Corporation http://www.zte.com.cn...
-
Page 15: Troubleshooting
Out of the network service area. area. The antenna or RF component is Replace relevant damaged parts. damaged. Wrong setting of parameters. (Phone, Correct the parameter settings. Consult your Dialing failed User, Password.) service provider for details. ZTE Corporation http://www.zte.com.cn... - Page 16 Win2000 Update Roll 1 patch for Win2K SP4. ?familyid=B54730CF-8850-4531-B52B-BF28B3 (SP4) operating 24C662&displaylang=en system .In this case, the device in device manager will marked with yellow exclamation mark, and the system must be restarted to run normally. ZTE Corporation http://www.zte.com.cn...
-
Page 17: Fcc Regulations
Changes or modifications not expressly approved by the party responsible for compliance could void the user„s authority to operate the equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. ZTE Corporation http://www.zte.com.cn... -
Page 18: Rf Exposure Information (Sar)
If you do no t use a body-worn accessory and are not holding the product at the ear, position the handset a minimum of 0.5 cm from your body when the product is switched Please make sure the temperature for adapter and device will be between 0-40 ˚C ZTE Corporation http://www.zte.com.cn...
Need help?
Do you have a question about the CDMA20001X EV-DO and is the answer not in the manual?
Questions and answers