Welch 8905 Owner's Manual page 2

While reading your manual, please pay close attention to areas labeled:
Warnings are given where failure to observe instruction could
instruction could result in damage to the equipment,
These units confirm to the SI International system of units of measurement.
The following symbols (with recommendation of IEC1010 ) of warning will be found on the pump.
Caution - refer to accompanying documents
Caution - risk of electrical shock
Caution - hot surface
Motor includes a self resetting thermal cutout and the pump could
INSTRUCTION
WARNING AND CAUTION
PLEASE READ BEFORE OPERATION
WARNING AND CAUTION.
The description of each is found below.
result in injury or death to people.
Cautions are found where failure to observe the
associated equipment and process.
restart without actuation under fault condition.
WARNING
CAUTION
WARNING
2