Table of Contents
Advertisement
Video Unit - Pocket Service Guide
REMOVING THE MAIN BOARD
12. Discharge the anode, as described in the
p a ra gra ph "DISCHARGING T HE HIGH
VOLTAGE", before starting to work on the
monitor.
13. Remove the video amplifier board as described
in the paragraph "REMOVING THE VIDEO
AMPLIFIER BOARD".
NOTE:
Disconnect the anode suction cap. Turn
the plastic top of the anode upside
down and draw the two catches of the
anode contact closer together.
14. Lift off the anode suction cap.
15. Disconnect connectors A, unscrew the screws
and raise the slots that fixing the main board
at the support.
16. Press catches and raise the board from side A.
17. Dis co nn ec t
d efle ctio n
potentiometers P connectors, than press catch
B and remove board.
20-4
Fig. 20-5 Removing the main board
y ok e
D
a nd
B
D
Fig. 20-6 Removing the main board
14" COLOUR DISPLAY UNIT - CDU 1435SE/GS11
A
A
P
Advertisement
Table of Contents
