Rear Cabinet Cover Lcd Panel And Front Bezel - Polaroid FLM-2632 Service Manual

Rear Cabinet Cover LCD Panel and Front Bezel

Note: Before disassembly of any part the TV, make sure the power is OFF, and the
power cord is removed from the wall outlet. Allow time for power within all system
boards to discharge before you begin disassembly. Never insert any objects into the
vent holes in the TV case.
Note: OEM LCD panels were used in production. The following LCD panel
disassembly/removal instructions may not apply to all models. Ensure LCD panel is
completely detached from the bezel before removing so the bezel is not damaged.
(1) Remove screws (PIC1) in the sequence of 1, A.
(2) Remove screws (PIC1) in sequence of 2, 3, 4, B, C, D
(3) Remove screws which fasten rear cabinet to front frame (PIC1) in the following sequence: A B C D E F
then 1 2 3 4 5
(4) Remove rear cabinet cover. Only the rear cabinet cover will come off.
*NOTE: Pictured is a 26" model. 32" and 37" models will have some different rear cabinet
cover screw quantities and locations.
23 www.polaroid.com