Connecting To Pc - Polaroid FXM-2611C User Manual

System Connections

Connecting to PC

The unit can be connected to PC (personal computer) via the VGA cable. Follow the figure below to
connect:
1. Connect one end of the VGA cable to the VGA input jack on the right side of the unit's rear panel.
2. Connect the other end to the PC.
3. Connect one end of the audio cables to the PC audio input jack on the right side of the unit's rear
panel.
4. Connect the other end to the PC audio output jack.
5. You should set the PC's resolution at 1024×768; and the refresh frequency must at 60Hz.
After connection, press the Input button and select VGA mode.
- 20 -