Detaching The Battery Pack; Using A Vehicle Dc Adapter - Polaroid PDV-0813A Operation Manual

Power Supply

Detaching the Battery Pack

If the DVD Player is not going to be used for long periods of time, the battery pack
should first be fully charged and the Battery Pack should be detached. When the
DVD Player is turned OFF, the DVD Player is still consuming some power in
STANDBY mode. This will eventually discharge the battery.
Make sure the power is turned OFF before detaching the Battery Pack.
1. Place the player on a soft and smooth surface with the bottom of the unit facing
up.
2. Press and hold the Battery Release Tab (1) (located on the bottom) in the
direction of the arrow as shown below.
3. Remove the Battery Pack by gently sliding it towards the back of the unit (2).
4. Carefully remove the Battery Pack from your player.
Using the Vehicle DC Adapter
To use the supplied Vehicle DC Adapter, disconnect the Battery pack and connect the
Vehicle Power Plug Adapter into the DVD Player's Power Jack and the other end into
the Vehicle DC outlet (Cigarette Lighter Socket) as shown below.
Quick Tips:
Do not operate the unit while driving a vehicle.
•
• Place the unit in a secure position for viewing.
Do not leave battery attached when using car adaptor as power source.
•
• Do not connect the unit to the car adapter when starting the car.
- 18 -