Related Manuals for PEERLESS CL-ENCL68
Summary of Contents for PEERLESS CL-ENCL68
- Page 1 User Manual SMALL FORM FACTOR ELECTRONICS ENCLOSURE MODEL: CL-ENCL68 CL-ENCL68-EUK www.peerless-av.com 2015-02-05 #:220-9004-2 (2017-01-03)
-
Page 2: Table Of Contents
CONTENTS General Safety Precautions ........................3 Relevant Information ......................5 System Installation And Electrical Requirements ..................6 Electrical Code ..........................6 Power Source ..........................6 Set Up Instructions ..........................7 What's In The Box ..........................7 Cable Entry/Exit ..........................8 Installation Of Electronics .......................9 Closing the Electronics Enclosure ....................10 Mounting the Media Player Enclosure (Optional) .................11 Powering Up ..........................12 General Care Instructions ......................12... -
Page 3: General Safety Precautions
GENERAL SAFETY PRECAUTIONS Read before operating equipment Thank you for purchasing our product. Before using it, please read this user manual carefully and follow the instructions correctly for safe operation. Please keep this manual handy for future reference. Also, please be sure to always include this user manual in the packaging when transferring or transporting this product to a different location. - Page 4 20. In case of product malfunction or unusual events such as electrical burning smell, smoke, due to internal overheating, immediately turn off and unplug the power and contact the manufacturer. 21. Do NOT install the product at such unstable locations as moving objects, constantly vibrating props, or uneven surfaces.
-
Page 5: Relevant Information
Relevant Information Once the Electronics Enclosure is installed, there is limited access to the electrical device inside. For future reference please record the device's serial number below. Electronics Serial Number ____________________________________ 2015-02-05 #:220-9004-2 (2017-01-03) -
Page 6: System Installation And Electrical Requirements
SYSTEM INSTALLATION AND ELECTRICAL REQUIREMENTS Electrical Code Note: To the display system installer: This reminder is provided to call attention to Article 820-44 of the National Electric Code that provides guidelines for proper grounding and, in particular, specifi es that the cable ground shall be connected to the grounding system of the facility. Outlet shall be installed near the equipment and shall be easily accessible. -
Page 7: Set Up Instructions
2. Electrical installation shall be in accordance with the applicable parts of Chapter 8 of ANSI/NFPA70. What's In The Box Parts List Description Part # A electronics enclosure CL-ENCL68 B M4 x 18mm socket screw SCR-0055 C dual lock 1 x 1.5" 600-1009 D dual lock strips 3M 600-1393... -
Page 8: Cable Entry/Exit
Cable Entry/Exit Before starting the installation of any electronic 3. Realign the metal base plate on the devices, ensure that the Electronics Enclosure Electronics Enclosure. Reinstall the 4 screws electrical cord is not plugged into electricity. into the metal base plate while making sure Failure to do so may result in injury or death. -
Page 9: Installation Of Electronics
Installation Of Electronic Device 4. Remove the release liner from one side of 1. From the top of the Electronics Encloser, the adhesive on the 4 Velcro pieces provided unscrew the 4 screws around the perimeter (C). Attach the 4 Velcro pieces to the bottom and remove the plastic top. -
Page 10: Closing The Electronics Enclosure
Button C - The surface of the enclosure between the two internal fans will cool slightly for 30 seconds (this can be felt by touch or by IR heat meter) If all functions are working properly, proceed to step 2, if not contact your Peerless-AV Customer Service Representative. -
Page 11: Mounting The Media Player Enclosure (Optional)
If the Electronics Enclosure is to be mounted, it's recommended to use an Outdoor Display (TV) Wall Mount. A mount is not included with the unit and can be purchased separately from Peerless-AV who can provide a variety of all-weather mounting solutions. Contact your Peerless-AV representative for an all-weather mounting solution. -
Page 12: Powering Up
If a power cord is not supplied with this equipment, please contact your supplier. Only plug equipment into receptacles with GFCI Plug Shape: protection. IMPORTANT: Peerless-AV is not responsible for Region: USA/Canada Europe any issues created by water present at the plug/... -
Page 13: Product Specifi Cations
PRODUCT SPECIFICATIONS Specifi cations subject to change without notice. Enclosure Operating -40° F to 115° F Temperature Ranges -40° C to 46° C Power Cord Length 8 ft (2.4m) Usable Internal 14.25 x 10 x 3.5" Space 362 x 254 x 89mm Product Dimensions 17.11"... -
Page 14: Warranty
Terms of Peerless-AV® Limited Warranty: or state laws. The Peerless-AV Electronics Enclosure is warrant ed t ree of the original owner. If this product is found and proved t than the Peerless-AV Authorized Service Provider. Dirty air waves, and/or unusual signal interference due to weak signal from Warranty. - Page 15 This page intentionally left blank. 2015-02-05 #:220-9004-2 (2017-01-03)
- Page 16 Escobedo N.L Mexico 66050 Ph: (800) 865-2112 Customer Care Servicio al Cliente Fax: (800) 359-6500 44 (0) 1923 200 100 01-800-849-65-77 www.peerless-av.com www.peerless-av.com www.peerless-av.com © 2017, Peerless Industries, Inc. © 2017, Peerless Industries, Inc. © 2017, Peerless Industries, Inc. 2015-02-05 #:220-9004-2 (2017-01-03)