Note - Midea MTA-76CRN1 Service Manual

Air-cooled Package

1. Note

CAUTION:
 Install the unit where enough space of installation and maintenance is available.
 Install the unit where the ceiling is horizontal and enough for bearing the weight of the indoor unit.
 Install the unit where the air inlet and outlet are not baffled and are the least affected by external air.
 Install the unit where the supply air flow can be sent to all parts in the room.
 Install the unit where it is easy to lead out the connective pipe and the drain pipe.
 Install the unit where no heat is emitted from a heat source directly.
 Installing the equipment in any of the following places may lead to faults of the equipment (if that is
inevitable, consult the supplier):
 The site contains mineral oils such as cutting lubricant.
 Seaside where the air contains much salt.
 Hot ring area where corrosive gases exist, e.g., sulfide gas.
 Factories where the supply voltage fluctuates seriously.
 Inside a car or cabin.
 Place like kitchen where oil permeates.
 Place where strong electromagnetic waves exist.
 Place where flammable gases or materials exist.
 Place where acid or alkali gases evaporate.
 Other special environments.
 Install the unit where enough space of installation and maintenance is available.
 Install the unit where the air inlet and air outlet are free from obstacles and strong wind.
 Install the unit in a dry and well ventilated place.
 Install the unit where the bearing surface is level and can bear weight of the unit, and is suitable for
installing the unit horizontally without increasing noise or vibration.
 Install the unit where the operation noise and the expelling of air do not affect neighbors.
 Install the unit where no flammable gas is leaked.
 Install the unit where it is convenient for pipe connection and electric connection.
60
DM13-01.01.16en
Service manual