Table of Contents
Advertisement
B.O.L.T User Manual
When charging is needed, please connect the base unit to the power source using the power
adapter.
The base unit can be operated by
o
Connecting to power source directly using the power adapter
or
o
Using the charged inbuilt battery (adapter not required)
The device can work normally while charging.
Replacement of Battery Pack
Manufacturer highly recommended to change the battery of the base unit for every 1 year at the AMI
authorized service center. Use AMI recommended battery for replacement.
Replacement procedure
1. Switch off the base unit before removing the back cover for the battery replacement.
2. Remove the single screw on the upper portion of the battery cover as shown below.
3. Press and remove the battery cover in the recommended direction as shown below.
4. Disconnect the battery pack from the connector and replace with new one.
© Copyright 2015, All Rights Reserved. American Megatrends India Private Ltd.
Model No: VA06
23
Advertisement
Table of Contents
