Blood Oxygen Level Measurement Procedures - American Megatrends B.O.L.T VA06 User Manual

B.O.L.T User Manual

Blood Oxygen Level Measurement Procedures

Mandatory instructions to be followed during blood oxygen level measurement

Relax yourself in a comfortable position.

Remain stable during the measurement.

Place the finger properly inside the SpO2 probe.

Clean the surface of the fingertip before the measurement.
Blood Oxygen Level measurement with B.O.L.T
B.O.L.T enables connecting a SpO2 probe through which the blood oxygen level is measured.
Connecting SpO2 probe with the gadget
Insert the SpO2 connector into the socket firmly as shown below.
Note: Ensure to clean your hands before taking SpO2 measurement. Some SpO2
reading fluctuation may be occurred of below 85% for certain ethnicity
group.
If the SpO2 values are deviated below 70% or above 100%, ensure that the
user positions his finger properly as shown below.
Measuring Blood Oxygen Level with B.O.L.T
1. Clean the rubber pad of the SpO2 probe touching the finger gently by a soft cloth dampened
with 70% isopropyl alcohol and let air dry or use soft dry cloth to clean before measurement.
© Copyright 2015, All Rights Reserved. American Megatrends India Private Ltd.
Model No: VA06
10