Operating The Appliance - Simpson CHC944BA User And Installation Manual

description
Control knobs
The cooking power can be set anywhere between level
LO and HI.
LO
HI
O
Residual heat indicator
The residual heat indicator lights up, as soon as the corresponding
zone is hot.
warning
WARNING
Risk of burns from residual heat. After being switched off, the
cooking zones need some time to cool down. Look at the
residual heat indicator.
environmental tips
ENVIRONMENTAL TIPS
Residual heat can be used for melting and keeping food warm.
Lowest power
Higest
Off position

operating the appliance

tips & information
TIPS & INFORMATION
When a cooking zone is switched on, it may hum briefly.
This is a characteristic of all ceramic glass cooking zones
and does not impair either the function or the life of the
appliance.
Setting the heat setting
The residual heat indicator lights up, as soon as the corresponding
zone is hot.
HEAT SETTING RING CONTROL KNOB
To increase Turn clockwise
To increase Turn anti-clockwise
Switch off Off
1. When boiling water/searing food, select a high
heat setting.
2. As soon as steam forms or the fat or oil is hot,
set a lower heat setting.
3. To end the cooking process, turn to the off position.
KNOB SETTING
Low – High
Low – High
Ceramic Cooktops DESCRIPTION 5