Table of Contents
Advertisement
Put over the handle on the opposite
side and cover up the vacant holes
with the plastic nails from the bag of
instruction book.
After released the screws the
adaptation of the doors can be
adjusted with the horizontal control of
central door holder.
Put the appliance to its place, set it
level and connect to the electricity
supply.
In case you do not want to perform the
procedures above, call the nearest
brand-mark service. Technicians will
accomplish the refitting expertly for
charge.
Electrical connection
This refrigerator is designed to
operate on a 230 V AC ( ~ ) 50 Hz
supply.
The plug must be put into a socket
with protective contact. If there is no
such, it is recommended to get an
electrician to fit an earthed socket in
compliance with standards near the
refrigerator.
This appliance complies with the
following E.E.C. Directives:
73/23 EEC of 19.02.73 (Low Voltage
Directive)
modifications,
89/336 EEC
(Electromagnetic
Directive)
modifications.
and
subsequent
of
03.05.89
Compatibility
and
subsequent
electrolux 43
GB
Advertisement
Table of Contents
