Table of Contents
Advertisement
ABB-Welcome
Add or edit a new contact list by logic address:
USER LIST MANAGEMENT
Physical Address
Fig. 31
User list management
Edit or add a logic address. The following functions are available:
No.
Functions
1
Enter the physical address and user logic address when add ing a new
contact list.
- Physical address: the address of an indoor station, from 001 to 250,
- Logic address: the code that visitors enter when calling a resident.
"OK"
2
|
which is an internal code sent through the bus and identified by all
devices within the system. (Set by using switches X100,X10,X1 of the
indoor station)
Usually, the logic address is the apartment No. of a resident which is
different from the physical address.
Error! Use the Home tab
to apply 标题 1 to the
text that you want to
Logic Address
appear here.
1
2
OK
Back
3
— 56 —
Advertisement
Table of Contents
