ABB-Welcome
- Press this button to set the VIPs.
4
Choose the type of intercept by ticking the checkbox
- "Permanent" mode and "Repeat" mode are available.
"Plus / Minus" buttons.
5
6
Back
- Press this button to return to the start page without saving the settings.
7
OK
- Press this button to save the settings.
In the "Repeat" mode, the timer(s) must be activated by ticking the
8
checkbox.
- When the timer is activated, set the start time and end time via the "Plus /
- Before adjusting to the "Hour" or "Minute"., the active range is
- End time > Start time
The function can only be set through master guard unit.
|
Minus" buttons.
highlighted in blue
Error! Use the Home tab
to apply 标题 1 to the
text that you want to
appear here.
— 16 —