Player Status Indicators - Sonos CONNECT:AMP Product Manual

12

Player Status Indicators

Indicator Lights
Flashing white Powering up
Solid white Powered up and associated
(dimly lit) with a Sonos system (normal
operation)
Solid white Touch control(s) active
(brightly lit)
Flashing green Powered up, not yet
associated with a Sonos
system
Or,
WAC (wireless access
configuration) join ready
Slowly flashing Surround audio is off or
green SUB audio is off
Solid green Volume set to zero or muted
Flashing orange During SonosNet setup, this
occurs after a button press
while the product is
searching for a household to
join.
Player State Sonos Product
BRIDGE, BOOST,
CONNECT, SUB,
CONNECT:AMP,
DOCK, PLAY:1,
PLAY:3, PLAY:5,
PLAYBAR
BRIDGE, BOOST, If desired, when the product is in normal
CONNECT, SUB, operation, you can turn the white status
CONNECT:AMP, indicator light on or off from Room
DOCK, PLAY:1, Settings. (The SUB and any players set to
PLAY:3, PLAY:5, surround reflect the same setting as the
PLAYBAR player they are paired with.)
PLAY:5 (gen2) Brightens when touch controls are
activated and remains at full brightness for
the duration of contact.
BRIDGE, BOOST, For a SUB, this may indicate the SUB is
CONNECT, SUB, not yet paired with a player.
CONNECT:AMP,
DOCK, PLAY:1,
PLAY:3, PLAY:5,
PLAYBAR
PLAY:1, PLAY:3, Applicable for player configured as a
PLAY:5 (gen2), PLAYBAR surround speaker, or for a SUB
SUB paired with a PLAYBAR
CONNECT,
CONNECT:AMP,
PLAY:1, PLAY:3,
PLAY:5,
PLAYBAR
BRIDGE, BOOST,
CONNECT, SUB,
CONNECT:AMP,
DOCK, PLAY:1,
PLAY:3, PLAY:5,
PLAYBAR
Product Guide
Additional Information