Related Manuals for Leadtek 3615
Summary of Contents for Leadtek 3615
- Page 1 EADTEK ideo Surveillance Network Camera Series Network Surveillance Camera 3615 & Wireless Surveillance Camera 3616 User Manual...
-
Page 2: T Echnical Support
The information in this document is subject to change without notice. Leadtek reserves the right to make revisions to this publication without obligation to notify any person or entity of any such changes. - Page 3 Copyright 2008 Leadtek Research Inc. All rights reserved International Headquarters 18th Fl., 166, Chien-Yi Rd., Chung Ho, Taipei Hsien, Taiwan (235) Phone: +886 (0)2 8226 5800 Fax: +886 (0)2 8226 5801...
-
Page 4: Table Of Contents
Table of contents Product Features Overview - NSC 3615 - WSC 3616 Interface System Requirement Introduction Configure the Network Camera - Start - ActiveX Viewer Login the Network Camera - IPCAM Discoverer - Internet Explorer Web Layout - System * SIP... - Page 5 * DDNS * Port Setting - Wireless - Camera * Camera * Encode Type * Call To User Management System Information System Log Appendix FAQs Warning...
-
Page 6: Product Features
Product Features roduct Features Network Camera can help you to view live surveillance video/audio over Ethernet/Internet. With its compact color CMOS lens 1.3Mega Pixel, MPEG-4/H.263 video and G.711/G.729 audio compression, built-in microphone, two-way audio communication with SIP protocol, the in-time monitoring can be flexibly extended to the Telephony world, such as interoperated with Video Phone/3G mobile etc. - Page 7 Product Features VerView Network Surveillance Camera 3615 Network Indicator LED Internal Microphone Access Incoming Indicator LED SIP Registration Status Indicator LED External Microphone Camera Rotate Switch Power Network Connector Connector CMOS Lens I/O terminal Audio Out Connector Reset Button Restore Default Button...
- Page 8 Product Features verView Wireless Network Surveillance Camera 3616 Network Indicator LED Internal Microphone Access Incoming Indicator LED SIP Registration Status Indicator LED External Microphone Antenna Camera Rotate Switch CMOS Lens Power Network Connector Connector Antenna Connector I/O terminal Audio Out Connector Reset Button Restore Default Button...
-
Page 9: System Requirement
Product Interface nterface Connector Network connector ¡ RJ-45 Ethernet Connector Antenna connector ¡ 2.0 dbi external swivel Antenna for transmitter and receiver Power connector ¡ DC connector 3- 5V DC, 2.5A max 10W Build-in Microphone ¡ 5M, Omni directional External Microphone ¡ 3.5mm mono earphone jack Audio out ¡... -
Page 10: Introduction
Introduction High-quality, High efficiency video & audio transmission via IP network The network surveillance camera allows you to view live video over internet. Your control center can be set up anywhere with internet access without being restricted by locations. Surveillance video is processed by the most up-to date compression technology and transmitted in MPEG-4 compression format, whose transmission efficiency and video quality remain uncompromised by the network, minimizing the lagging of live surveillance video. -
Page 11: Configure The Network Camera
¡Yes¡ to apply the modified security settings Configure the Network Camera The simplest way to locate a Leadtek Surveillance Camera in network is to use the Leadtek utility program. It can scan the local network for all Leadtek cameras and helps users for configuring the network. - Page 12 Configure the Network Camera Method I. The Utility Program ¡ IPCam Discoverer IPCAM Discoverer is an application that can help on detecting the network cameras and then you can use PC/Notebook to connect to the cameras on network . 1. Insert the packing CD into the CD-ROM drive from your PC. 2.
- Page 13 Configure the Network Camera Method II. Internet Explorer Address Bar Another way to connect the network camera is to visit with static IP address. Login the network camera by directly entering the IP address at the IE Address Bar. 1. Manually assign the last digit (192.168.0.x , 0<x<255 & x is not equal to 100) of your PC IP address field.
- Page 14 Web GUI eb Layout Network camera can be accessed and modified via browser. The webpage provided the image view from the camera and function link on the left. Select the main menu on the left side of the screen to enter the sub-menus. A.
-
Page 15: System
Web GUI System Language Users may change the webpage interface language for better using Network Camera. Just click on the language selection option, all supported languages will be shown in the drop-down list. For the different languages, users can choose from following options. English Japanese French... -
Page 16: Sip
Web GUI SIP Configuration Network protocol used for VOIP (Voice over IP) telephony. SIP Register Enable to register automatically with a registry server SIP Server SIP proxy or redirect server that provides location services Server Port The supplied default for parameter 5060 Register Timer The supplied default parameter is 3600 (seconds) Domain Name... -
Page 17: Aps
Web GUI APS Configuration Auto Provision System purpose is provided device specify configuration and account info from the provider. Click to ¡System¡ ¡APS¡ , and set the options ¡ ON¡ to enable APS. Click to ¡ System¡ ¡ Other¡ , and press the ¡... -
Page 18: Firmware Upgrade
Web GUI Firmware Upgrade Upgrade 1.Click the ¡Browse¡ button and locate the file of new firmware. 2.Click the ¡Upgrade¡ button to begin the upgrade procedure. System Reboot Click the ¡Execute¡ button to restart Network Camera Device. Reset Data to Factory Default Click the ¡Initial¡... -
Page 19: Dido
Web GUI DIDO DIDO Configuration DI Enable Enable terminal block DI Type Trigger for 2 types IM Notify IP Send message to specify IP address IM Notify Phone number Send message to specify registry sip server phone number IM Notify Enable Notification SMTP Send Send Notification by SMTP... -
Page 20: Surveillance Password
Web GUI Surveillance Password Surveillance Password Configuration The password will help to permit authorized accesses. Enable Password Enable to allow you have Encryption Privacy Picture function Input Password The supplied default parameter is ¡12345¡ ,Numeral Only. Confirm Password Re-type the Password for confirmation Video with password protected Video without password protected... -
Page 21: Network Type
Web GUI Network Network Type The Network Sub-Menu is for you to configure all network related settings. NSC3615/WSC3616 network default type is Local LAN. Any modification will restart the system to take effect. Make sure of each field is filled correctly before rebooting the machine. -
Page 22: Ftp
Web GUI FTP Service Setup When FTP service is enabled, camera sends a still image to the FTP server every time the alarm triggered. Server Name Enter FTP server IP address or Domain Name Login Name The username to login the FTP server Login Password The password to login the FTP server... -
Page 23: Smtp
Web GUI SMTP SMTP Service When SMTP service is enabled, the camera sends a still image to a specific email address every time the alarm triggered. Server Name Enter the mail server to send the email (POP3 Server) Login Name Enter username that mail server required authentication Login Password Enter Password that mail server required authentication Send From Enter Personal E-mail account Send To Enter the E-mail account that you want to send... -
Page 24: Ddns
Web GUI DDNS DDNS To find the free-of-charge DDNS service, please got to visit the DynDNS website (www.dyndns.org) and register for a dynamic domain name which can be used to access it over internet. DDNS Client Enable To use or not to use Dynamic DNS mechanism. The ISP will dynamically allocate an IP address to your network camera, if you dial up to internet by ADSL/Cable modem. -
Page 25: Port Setting
Web GUI Port Setting Port Setting Setup the ports for data transmission from the camera on internet. RTP Port The supplied default port range is ¡6000 ¡ 8000¡ HTTP Port The default HTTP port number is ¡80¡... -
Page 26: Wireless Configuration
Web GUI Wireless Wireless Configuration Wireless Enable Enable the Wireless mode SSID Specify wireless client attempting to connect a specify WLAN Auto Mode Setup in Auto mode Infrastructure Mode Setup Network Camera connect to WLAN via Access point Ad-Hoc Mode Setup Network Camera connect directly in peer-to-peer Data Encryption None No data Encryption Data Encryption WEP Allow communication only with other device identical WEP Ad Hoc:... -
Page 27: Camera
Web GUI Camera Camera Configuration Resolution QCIF,CIF,VGA,D1 four kinds of resolution. Default CIF The higher resolution will be clearer than the smaller, but it will occupy a larger bandwidth. Bit Rate Control Control Enable/Disable video stream Bit Rate 64kbps,128kbps,256kbps,384kbps,512kbps,768kbps,1M Frame Rate Adjust the amount of the frame per second allowable Default 15 Brightness The supplied parameter 1 ¡... -
Page 28: Encode Type
Web GUI Encode Type Encode Setting Determine which Audio/Video codec to be streamed between client and server. Audio Type G.711 PCMA G.711 PCMU Video Type H.263 MPEG4... -
Page 29: Call To
Web GUI Call to Call To Support for all SIP proxy, peer-to-peer or SIP URL call control feature. In NSC3615/ WSC3616, only Motion Detection could trigger Call-To function. Please set related source policy from ticking the checkbox ¡Motion Detection¡. For viewing from mobile phone, video and audio setting encoding type should be set first as mentioned in previous paragraph. - Page 30 Web GUI User Management User Management For accessing user accounts management. Add New User Create accounts for new users. User ID English and number to make up user name, less than 16 characters. User Password Enter Password. User Group The new account will be grouped with ¡ Guest¡ as default. Guest level can only view information without any privilege to modify for any configurations.
-
Page 31: System Info
Web GUI System Info If will display with useful system information for users¡ reference, such as SIP registration/System Uptime etc. System Information Model Name Product Model Name Firmware Version Network Camera System Version IPCAM ID Product ID IPCAM IP Current IP address of Network Camera Phone Number VOIP authentication for identification SIP Registered Status Registry option status SIP Registered Registry on SIP Server statement... - Page 32 Web GUI System Log System Log Shows log system time, IP status information.
-
Page 33: Led Indicator Status
APPENDIX LED Indicator Status LED patterns lists table. NSC3615 WSC3616 LED 1 LED 2 LED 3 Condition Color Status LED 1 Loading and Detecting Steady Blue till IP address is Network confirmed LED 1 Wireless Loading and Steady Amber after IP address is Detecting Network confirmed LED 2... -
Page 34: Restore Factory Default
APPENDIX Reset / Restore Factory Default To reset Network camera or Restore Factory Default settings. RESET: Press the ¡Rese t¡ button and wait that the indicator LEDs been turned on. RESTORE: 1. Press the ¡Restore Default¡ button continuously and hold for 3 seconds. 2. -
Page 35: Internet Explorer Security Settings
APPENDIX Internet Explorer Security Settings The ActiveX control must be downloaded from the camera and installed on your PC. Internet Explorer security settings must allow for the web page working properly. Download signed ActiveX controls Run ActiveX control and Plug-ins ... - Page 36 APPENDIX Check Network Connection Determine your IP address and network settings, please following the procedures. 1. Click on ¡ Start¡ ¡ Run¡ and type in: ¡ cmd¡ and then press ENTER 2. In the MS-DOS window, type in: ¡ ipconfig¡ and then press ENTER 3.
- Page 37 PING is a very useful MS-DOS command to check if Network Camera is still responding or if an IP address is available. 1. Click on ¡ Start¡ ¡ Run¡ and type Cmd and press ENTER. 2. In the MS-DOS window, type Ping 192.168.0.100 3.
- Page 38 Explorer Security Settings to correctly configure your Internet Explorer. Q: Internet Explorer displays the following message: ¡ This website wants to install the following add-on: ¡ NetcamX¡ from ¡Leadtek Research Inc.¡. if you trust the website and the add-on and want to install it, click here¡...
- Page 39 Q: I cannot access the Network Camera from Web browser ! 1. Please use the command ¡ PING¡ to check the network connection. If the shown response is ¡ Request timed out¡ , it may caused by the incorrect setting of IP address.
- Page 40 Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- Page 41 FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.