Tv System Setup; Tv Function - Polaroid PDM-0817 Operation Manual

TV Function

Basic Operation
Connect the antenna to the antenna jack on the rear panel. After connecting the
antenna, connect the power supply cord. If the player is in standby mode, press the
POWER button on the front panel to turn on the power.
Press the TV button on the remote control to shift to TV mode.
Press the buttons on the remote control to select the desired channel, or press
the number buttons to select your desired channel. (See page 12)
Some preferences can be preset:
Picture Parameter Setup
Press the MENU button once on the remote control to enter PICTURE setup menu,
and screen display as shown:
Use the ▼、▲ buttons to select the item you want to set (Brightness, Contrast, Color).
Use the ►, ◄ buttons to adjust, you can adjust the items between 0 and 20.
Use the ▼, ▲ buttons to select the Language, press the ►, ◄ buttons to select
English, French or Spanish.
To restore a setting to the original value, use the ▼、▲ buttons to select Reset, then
press the ENT button to confirm the change.
Press the ◄ button on the remote control to exit the setup menu.
Press the ► button on the remote control to enter TV Setup menu.

TV System Setup

When the ► button is pressed, the TV system setup menu will appear:
PICTURE
BRIGHTNESS
CONTRAST
COLOR
LANGUAGE ENGLISH
RESET
◄ EXIT TV SETUP ►
TV SETUP
SIGNAL
CHANNEL
SKIP
BLUE SCREEN
FINE TUNING
AUTO MEMORY
◄ PICTURE
- 17 -
10
10
10
CATV
002
ON
OFF
EXIT ►