Taking Pictures In Macro Mode - Polaroid T737 User Manual

NOTE:
• (Still Image) mode is the capture mode by default.
• When the camera's focus mark are in red, there is difficulty in focusing the
subject. Release the Shutter button, recompose the scene and press the
Shutter button halfway to reset the focus.
• The LCD screen will show you the aperture value and shutter speed at which
you take the picture.
• If the shutter speed is slow or that the image maybe blurred, the shake
warning icon may appear on the LCD screen. To avoid this situation, the
use of a tripod is recommended.
4. Hold the camera steady and slowly press the shutter button down to
take your image.
32
Polaroid t737 Digital Camera User Guide
www.polaroid.com

• Taking Pictures in Macro Mode

Use this mode to capture subjects close to the lens:
Wide Angle: 0.33 ~ 1.64 ft (10 cm ~ 0.5 m)
Telephoto: 0.33 ~ 1.64 ft (10 cm ~ 0.5 m)
1. Press the button to set the camera to
Still Image mode.
2. Press the button and the
on the LCD screen.
3. Capture procedures are the same as for
taking a picture in the normal capture mode.
See page 31.
Polaroid t737 Digital Camera User Guide
www.polaroid.com
Macro Button
icon appears
3072 X 2304
00012
33