If The Pdc-2000 Is The Only Scsi Device - Polaroid PDC-2000 User Manual

If the PDC-2000 is
the only SCSI device
24
WARNING: DO NOT CONNECT OR DISCONNECT THE
PDC-2000 CAMERA OR ANY OTHER SCSI DEVICE
WHILE THE DEVICE OR YOUR COMPUTER IS TURNED
ON. DOING SO COULD DAMAGE THE DEVICE, YOUR
COMPUTER, OR BOTH. (TURN OFF THE CAMERA BY
PRESSING POWER BUTTON a.)
If the PDC-2000 camera is the only external SCSI device
being used with your computer, turn off the computer and the
camera. Then connect the SCSI system cable provided to the
computer's SCSI port (a). Connect the other end of the system
cable (b) to the camera's SCSI connector.
Use only the cable provided with the camera. Other cables
may appear similar, but could damage the camera or your
computer.