Normal Operation ................................................................................................................................................................ 2
Features ............................................................................................................................................................................. 3
Menu Map ........................................................................................................................................................................... 5
Overview The Direct Fired Control (DFC) is a digital gas fired heating control. The control has a simple five button interface with a four digit LED display. All programmable parameters can be accessed through the user menu with the five button interface.
If the wrong password is entered then the DFC will return to normal mode. Modulating Valve Outputs: The DFC has the ability to power either a 24V DC or a 10V DC modulating valve. Only one valve at a time may be connected. 7 PWM For Solenoid Valve...
Remote (rEtd) allows the user to use the DFC’s built-in Set a temperature offset. For examples, to correct toFS interface when disabled (dAbL) or an external remote for duct losses or sensor calibration errors.
Page 6
Remote (rEtd) allows the user to use the DFC’s built-in Set a temperature offset. For examples, to correct toFS interface when disabled (dAbL) or an external remote for duct losses or sensor calibration errors.
4.84 Figure 5: DFC Front Panel Figure 6: DFC Side view ***All dimensions are in inches *** Wiring for the DFC is convenient for the user with easy access to all terminal connections. 1 24VAC 2 24VAC 3 DFTS 4 DFTS...
Need help?
Do you have a question about the DFC and is the answer not in the manual?
Questions and answers