Air Heaters Settings Menu - OLED PU-27 Operating Manual

Air heaters settings menu

Heater T based
Control panel T
based
Exterior T based
Power based
Set power
Set temperature
Ventilation
Keys
Exit from menu to the main screen
Settings menu items:
In the "heater T based" mode, the "Set temperature" of the
temperature sensor located in the heater is used for operation.
In the "control panel T based" mode, the "Set temperature" of the
temperature sensor located in the control panel is used for
operation.
In the "exterior T based" mode, the "Set temperature" of the
exterior temperature sensor is used for operation.
In the "Power based" mode, the "Set power" is used for
operation.
Heater power value in the 0 to 9 range, where 0 is minimum and
9 is maximum power.
The value at which the heater will switch to standby mode. The
heater will switch from standby mode when the temperature of
the sensor used to control heater operation drops 5 °C below the
"Set temperature" value.
Ventilation mode ON setting
- Ventilation mode OFF. When the heater switches to
standby mode, the air pump will shut off.
✓
Ventilation mode ON. When the heater switches to standby
mode, the air pump will continue to operate in ventilation
mode.
Action of Settings menu keys:
Change menu item value
Action
13
.