Step 3 Set the mode of operation
You can either ride in "auto" or "pedal assist" modes. There are six levels of assist, from low
(economy to highboost).
Setting to Auto (Throttle mode)
SHOWS AUTO MODE ON THE DISPLAY
The LCD has a small icon which shows "AUTO". Press the DOWN arrow on the display until the
six 'pedal assist' bars disappear and AUTO is displayed. This puts the bike in THROTTLE
MODE. BE CAREFUL. The motor is activated using the twistgrip throttle on the handlebar. The
more it is turned, the more power is sent to the motor.
WARNING: If you turn the throttle with the wheel on the ground, the bike may lurch forward. If you
wish to test the motor is working, LIFT THE FRONT WHEEL BEFORE TURNING THE
THROTTLE. ALWAYS USE THE BRAKE TO STOP THE WHEEL BEFORE PUTTING ON THE
GROUND. LOOK AROUND TO MAKE SURE ITS SAFE TO TEST.